Forums

Forums
Renewable Heating
Air Source Heat Pum...
Vaillant Arotherm m...
 
Notifications
Clear all

Vaillant Arotherm monobloc error f.788 - ASHP is not working!

 
Page 3 / 3
Air Source Heat Pumps (ASHPs)
Last Post by bobshopsupreme 10 months ago
31 Posts
9 Users
7 Reactions
9,114 Views
RSS
 iancalderbank
(@iancalderbank)
Noble Member Contributor
Joined: 3 years ago
Posts: 643
14/03/2023 11:08 am  

@william1066 so my system did the experiment for me today.

I currently have a commissioned ASHP, the flow side goes to a 50L volumiser, then there is temporary shortcut (i.e. a bypass) back into the return side. I temporarily created demand so the ASHP has warmed up the water in the circuit and volumiser. the routes from the ashp's f+r circuit into the house are currently capped - there is no load on the ashp. the house is  still on the boiler.

the graph starts when I got modbus working yesterday evening. RWT goes below 25 right at the start but nothing comes on. When Outside temp goes below 4C, the system switches the circulation pump on. But not the compressor. the lukewarm water in the circuit must be enough to satisfy the warmth needs of the outdoor unit. After that, the pump is leaving  "off" gaps of 60 minutes then running for about 6-8 mins each time. I'm not sure what the "off" trigger is at the end of the "on" period. It'll be interesting to see how cool it gets before it puts the compressor on.

image

My octopus signup link https://share.octopus.energy/ebony-deer-230
210m2 house, Samsung 16kw Gen6 ASHP Self installed: Single circulation loop , PWM modulating pump.
My public ASHP stats: https://heatpumpmonitor.org/system/view?id=45
11.9kWp of PV
41kWh of Battery storage (3x Powerwall 2)
2x BEVs


   
👍
1
ReplyQuote
 william1066
(@william1066)
Reputable Member Member
Joined: 3 years ago
Posts: 206
17/03/2023 7:01 pm  

Posted by: @iancalderbank
↑

I'm not sure what the "off" trigger is at the end of the "on" period.

Probably just "x" amount of time


   
ReplyQuote
 Fxd
(@fxd)
New Member Member
Joined: 2 years ago
Posts: 1
29/10/2023 3:35 pm  

Hi, 

I have the same Error F788 did you finally fix it? 
Coule you please tell me Howell did you do? 
thanks for tour help


   
ReplyQuote



Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3397
07/11/2024 9:40 am  

@bobshopsupreme did you ever get this matter sorted out?

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 bobshopsupreme
(@bobshopsupreme)
Eminent Member Member
Joined: 3 years ago
Posts: 11
Topic starter 07/11/2024 9:58 am  

@editor Hello. Yes and no! The original problem was indeed a dead water pump, killed by contamination in the circuit and possibly the power cut during freezing conditions (we do have anti-freeze valves). It took two months to get a replacement part.

We have then had another 2 years of fun with shutdowns caused by low flow due to under-dimensioned pipes, and then we still have a contamination issue which seems to be coming from the radiators. At the moment the flow rate gradually decreases over several weeks until the system cuts out with a low flow error, and then is fine again after cleaning the filters. They are trying to find the right product to protect the inside of the radiators because whatever inhibitor they have in there at the moment clearly isn't working.


   
👍
1
ReplyQuote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3397
07/11/2024 10:53 am  

@bobshopsupreme very interesting. Do you have a buffer tank or is it an open zone?

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 bobshopsupreme
(@bobshopsupreme)
Eminent Member Member
Joined: 3 years ago
Posts: 11
Topic starter 07/11/2024 10:59 am  

@editor We have a 200 litre buffer between the hydraulic station and the radiator and underfloor heating circuits. The flow rate problem was due to undersizing of the pipes between the outdoor unit and the hydraulic station. Those pipes have now been changed and it now meets the >2000l/hr nominal flow rate when the filters are clean.


   
ReplyQuote
Page 3 / 3
Forum Jump:
  Previous Topic
Next Topic  
Related Topics
Topic Tags:  breakdown (2) , heatpump (2) , Vaillant aroTherm (9) ,



Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →