Search with Wattson

Notifications

Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

HP Cycling, Expected or Undesirable

bontwoody · 2024-07-09T13:57:04Z

After upgrading the insulation and radiators in my living room, the cool Summer has given me the opportunity to see what effect this has had on my heat pump. Initial results were excellent with me dropping the lower end of my WC curve by 6 degrees C, however now I have hit the point where I am seeing cycling as the pump cant get rid of enough heat. The graph from this morning shows this clearly. Its obviously a nice problem to have and the COP is very high, but is this cycling too much? Would I be better raising the flow temperature to try and stop it or will the scroll compressor cope? The temperature in the living room hit 24C before I turned the heating off, so there is an opportunity to lower the flow temperature even more. Opinions please?

Page 4 / 4 Prev

Air Source Heat Pumps (ASHPs)

Last Post by bontwoody 2 years ago

38 Posts

8 Users

10 Reactions

11.1 K Views

RSS

bontwoody

(@bontwoody)

Noble Member Contributor

Joined: 5 years ago

Posts: 1059

Topic starter 19/07/2024 6:26 am

@old_scientist Hi, yes I was comparing COP without taking the cycling into account.

House-3 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
10kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60

👍

ReplyQuote

bontwoody

(@bontwoody)

Noble Member Contributor

Joined: 5 years ago

Posts: 1059

Topic starter 23/07/2024 8:06 am

Just a little update. I ordered a longer shielded twin core wire and moved the control pad/thermostat into the living room from the hall where it was set to 24C allowing me to run on pure weather compensation. Ive lowered it now to 22C to limit the living room temp.

Last nights graph was very promising.

I finished the switch at 19.40 when the pump was cycling and the thermostat did its job keeping the room toasty and elongating the off periods. Ill have a play with WC settings over the next week or so and see if I can lower the flow temperature further.

👍

ReplyQuote

Page 4 / 4 Prev