An American talking sense about sizing HVAC.
There are some very good YouTube presentation from Technology Connections on many subjects and to my mind they are presented in a very enjoyable style without gimmicks and with a lot of good sense!
Is a long presentation and I understand there is a shorter version which I have not watched; the presenter covers his subjects along with well controlled and amusing min-rants - he speaks a lot of sense. This particular presentation is commendable and I suggest dear reader, you give it a try! Regards, Toodles.
Toodles, heats his home with cold draughts and cooks food with magnets.
Good find Toodles.
So it would appear to be rip-off USA as well as rip-off UK when it comes to heat pumps, which is why I installed an air to air one. 😎
@derek-m It is indeed a case of the ‘Blind leading the Blind’ for the vast majority of purchases worldwide I suspect - though perhaps the Scandinavians and a few other areas, have so much more familiarity with the concepts that more sensible tactics might be employed there. Perhaps the ideas expressed in this presentation should be made compulsory watching or listening, especially by installers! We (on this forum) are all aware of the best practice involved but are others??? Regards, Toodles.
Toodles, heats his home with cold draughts and cooks food with magnets.
- 26 Forums
- 2,406 Topics
- 54.6 K Posts
- 383 Online
- 6,092 Members
Join Us!
Worth Watching
Latest Posts
-
RE: New Daikin 11kW Altherma 3M install - is it working as it should?
I forgot to mention: Octopus measured our heat loss at ...
By Toodles , 31 minutes ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
When the grid is off, there it could be that the neutra...
By Batpred , 39 minutes ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
Thanks Mars and thank you for reaching out to so many p...
By iotum , 52 minutes ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: @davec Manufacturer: Peak Energy Mode...
By DaveC , 52 minutes ago
-
RE: Rate the quality of your heat pump design and installation
@radwhispererdwhisperereorourkeditor Well, the guy came...
By razz , 57 minutes ago
-
RE: Setback savings - fact or fiction?
Given the weather has been relatively stable, the empir...
By Batpred , 2 hours ago
-
RE: Post-Traumatic Heat Pump Stress Disorder
@jamespa Hi James - thanks so much! That sounds like ut...
By johnbroome , 2 hours ago
-
RE: Heat pump not reaching flow temperature
@jamespa system design was for 40 degrees FT at -2 degr...
By DaveC , 3 hours ago
-
RE: GSHP WOES! Midland based engineer recommendations?
@editor That is very kind! Thank you so much.
By johnbroome , 3 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@wally Hi I am not sure how large your house is b...
By TechnoGeek , 4 hours ago
-
Please help with the settings ecodan
I have a 160 square meter house, first floor 6 radiator...
By nose1972 , 4 hours ago
-
RE: Predicted Heat Loss & Needs from MCS calcs vs EPC vs actual
I've been thinking along similar lines to @tim441 from ...
By Sheriff Fatman , 4 hours ago
-
Thanks, @technogeek. Good to hear about the accuracy. ...
By Majordennisbloodnok , 5 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
In my case it was a very specific pattern of behaviour ...
By Sheriff Fatman , 5 hours ago
-
RE: Vaillant aroTherm not heating with many faults
@ashp-bobba Yeah I'll give it a go, will check filter...
By Anon67 , 5 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@transparent Perhaps the names at the end of the docume...
By Toodles , 5 hours ago
-
RE: Heatpunk Floor plan issues
@jamiejones85 A2A they will design on dynamic heat loss...
By ASHP-BOBBA , 6 hours ago
-
RE: Fan unit Making terrible noise HELP!!
can you post a video looking inside, at and through the...
By ASHP-BOBBA , 7 hours ago
-
RE: Power outages and storms: A surprisingly good DNO experience
Agreed, which is no more nor less than a customer shoul...
By Majordennisbloodnok , 24 hours ago

