Recent Posts

| Forums | Topics

Page 99 / 164 Prev Next

Posts with their shortened content
	RE: Getting ready for export By Majordennisbloodnok, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	I’m frankly amazed you think anything I have posted on this thread has been confusing. However, that’s irrelevant. My primary goal - and responsibility - here is to ensure the information provided on ...
	My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus By jords, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	This is going to be a long post. But wanted to share my experience with 3 companies around heat pump surveys. So a bit of background first. Live in a 4 bed property around 167m2. Have 2 small childre...
	RE: Mixergy Tank Failure By bontwoody, 3 weeks ago Forum Domestic Hot Water & Cylinders
	I may have found the problem. There is a valve on the return side to stop the water when it was originally plumbed in with nowhere to connect to. It was closed! I've opened it and will try again tonig...
	RE: Getting ready for export By Batpred, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	@majordennisbloodnok You are causing a lot of confusion. Do not overthink this
	RE: Master & Slave Zones/Setback By JamesPa, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	In principle you probably don't at present given it's (presumably) still quite mild, depending on location. Most likely one alone has sufficient capacity (and may do down to quite a low temperature d...
	RE: Master & Slave Zones/Setback By bretix, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa sorry yes I have set wc 2102 set at 44ç (max outgoings water temp) 2103 set at 28ç (min outgoings water temp) 2104 set at 0ç ( default min outdoor temp) 2105 set at 20ç (max outdoor temp) Bot...
	RE: Replacing knackered oil boiler with Samsung ASHP - Perthshire By DowallyDrifter, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thanks for your full reply @mike-h. It certainly cleared up most thoughts thoughts. When the heat pump heats DHW the flow temperature will peak in the high 50's when the target temperature for DHW i...
	RE: Master & Slave Zones/Setback By bretix, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa thanks I'll give that a go
	RE: Replacing knackered oil boiler with Samsung ASHP - Perthshire By DowallyDrifter, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@dgclimatecontrol thanks for the reply. subesequent reply from Mike_H says legionella cycle is done by the imersion which makes sense to me. Not sure how the existing manifold pump could now be wire...
	RE: Effect of Mitsu PAR WT60 Wireless Controller By DavidAlgarve, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi Rob. Thanks for your comments and I am relieved that I appear to be on the right track. I had to step in and do the PAR WT60 installation myself after my contractor failed to do so and I was rather...
	RE: Getting ready for export By Majordennisbloodnok, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	Nothing broad about what I’ve posted. My original post simply pointed out that any domestic electrical work (apart from a very few minor exceptions) must be signed off by a qualified electrician. You ...
	RE: Daikin Octopus installation update - I saw my first defrost. 😍😂 By Jancold, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	I don't seem to have a mixer valve. Just pressure regulator. Attachment : PXL_20251021_204934346.jpg