Recent Posts

| Forums | Topics

Page 37 / 159 Prev Next

Posts with their shortened content
	RE: RDSAP10 effect on existing heat pump EPC rating? By Transparent, 1 week ago Forum Government Schemes, Regulations, Planning & Organisations
	The house is T-shaped @toodles. The SW side has another part of the roof at right-angles to what's visible in the photo. Attachment : PVpanelPlan.png I would've put PV on that section facing SE...
	RE: RDSAP10 effect on existing heat pump EPC rating? By Toodles, 1 week ago Forum Government Schemes, Regulations, Planning & Organisations
	And further more, why so few panels fitted as there is obviously space for far more? If one has gone to the effort to fit a system, I would nave thought making the most of the space would be advisable...
	RE: RDSAP10 effect on existing heat pump EPC rating? By Toodles, 1 week ago Forum Government Schemes, Regulations, Planning & Organisations
	@transparent Nothing on the south west side??? Toodles.
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	I have just looked at my heat pump 'long interval' (27 March 2023, because that is when I started full monitoring, to 3 Nov 2025) energy in data as measured by (a) the external Eastron kWh meter and (...
	RE: RDSAP10 effect on existing heat pump EPC rating? By Transparent, 1 week ago Forum Government Schemes, Regulations, Planning & Organisations
	What does the SAP/EPC scoring method have to say about the orientation of the solar panels? Does it still count as 2kW if the developer has placed the six panels on a section of the roof facing north-...
	RE: UFH downstairs and radiators upstairs balancing question By davidnolan22, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@toodles sorry, my bad. Its a 6 port LLH. of the 2 higher ones, the rad circuit is the lower of those 2.
	RE: UFH downstairs and radiators upstairs balancing question By Toodles, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@davidnolan22 If I understand you correctly, you are saying that the output to the radiators is being fed from the lower port on the LLH. Normal practice is that the top port opposite the flow from t...
	RE: My DIY Heat Pump installation By Polar bear, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	Attachment : IMG_0616.JPG @grantmethestrength That is kind Attached are photos First is of the control unit I have that is plugged in to the ack of the ASHP and the only variables I can...
	RE: balancing radiators with a mixture of different size pipework and a few undersize rads. By JamesPa, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	In short yes. Balancing so that delta t across the rad is equal will theoretically achieve this, but of course that depends on the design and loss calculations being spot on. Treating this as a star...
	RE: UFH downstairs and radiators upstairs balancing question By davidnolan22, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@ashp-bobba Hi, thanks for reply. I've started to play, its still very warm outside so need it to get cooler, but I've closed 2 loops out of 9 where we are most overpowered with the UFH, This did in...
	RE: balancing radiators with a mixture of different size pipework and a few undersize rads. By Mars, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	Hi and welcome to the forums. Did the Heat Geek installer not balance your rads during commissioning?