Recent Posts

| Forums | Topics

Page 32 / 162 Prev Next

Posts with their shortened content
	RE: Daikin Short Cycle Query By Toodles, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	Herewith a plot of flow rates during the last 36 hour or so. Regards, Toodles. Attachment : IMG_1386.jpeg
	RE: Daikin Short Cycle Query By Toodles, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	I might add that we do have an LLH with a secondary pump (Wilo Pico). Having put temperature probes on all four LLH ports, I have been able to set pump speed to match the primary pump in the Daikin wh...
	RE: Daikin Short Cycle Query By Toodles, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	@ubert767 Just for comparison, here is a plot of my Daikin EDL08 Monobloc system from the last 36 hours or so; the pump is controlled via a Homely smart controller and we heat the whole house to 22.5 ...
	RE: Samsung Gen6 and Havenwise ........ By Alfapat, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	I am no expert on this but on your gen 6 controller once you cahange user set To 0 , then havenwise takes over and I assume that the original settings stay in the back ground. I have just changed my ...
	RE: Help me keep the faith with my air source heat pump installation By AgentGeorge, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	@adamk these are called roll top rads, they were still available at screwfix till few years ago in their budget range. The bleed keys are not strong, ive had to use a pair of pliers on the tab of the ...
	RE: Help me keep the faith with my air source heat pump installation By JamesPa, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	made of brass not plastic, proper square hole same shape as bleed screw. I did a quick search and they seem relatively rare, most seem to be a (presumably) cheaper design where the hole has been cut r...
	RE: Help me keep the faith with my air source heat pump installation By AdamK, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	@agentgeorge this is on a 30 year old rad at a guess. They’re like an odd little insert that is about 10-15mm in size with the bleed screw in the centre. on another question, what’s a decent bleed key...
	RE: Anyone able to provide some feedback before I make my finale decision? Samsung vs Baxi vs Vaillant By AdamK, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	If the Vaillant is a 7kw unit I’d avoid. Quiet outside noisy inside when it’s going full on. They have a problem with compressor vibration being transferred into the house pipework, so if your primari...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 5 days ago Forum Air Source Heat Pumps (ASHPs)
	So its clear temps are downward trending. Suspect nightmode off is the cause. its relatively cooler temps now outsife over night so I wouldn’t expect this (eg flow temp would have gone up on the WC) I...
	RE: Testing new controls/monitoring for Midea Clone ASHP By benson, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	It has it's uses and there is no way I could have set the helpers up myself without any chatgbt input, or not quickly anyway- but yes I can see where you are coming from. If it can make life a bit eas...
	Samsung Gen6 and Havenwise ........ By Lenny, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	I sourced the Wi-Fi unit (City Plumbing - £122 with 15% disc for 1st App purchase) and it installed with little fuss. Havenwise App reckoned I needed a Shelly Temp unit (which they sent FOC) and that ...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By JamesPa, 6 days ago Forum Air Source Heat Pumps (ASHPs)
	Definitely. 8C DT is higher than the default design DT for most heat pump systems which is 5 This has the effect of reducing the average flow temp by 1.5C, which will of course reduce output if the ...