Recent Posts

| Forums | Topics

Page 106 / 165 Prev Next

Posts with their shortened content
	RE: Electricity price predictions By Batpred, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	My 2c: A solution that trades in NY would not have the edge components in the UK, even without an architect being involved. But there will be many "workloads", etc. We are on a very generic discussio...
	RE: Say hello and introduce yourself By JamesPa, 3 weeks ago Forum Introductions, Forum Rules & Updates
	I think this is where we may differ. Nothing makes sense from the point of view of a customer if it regularly produces garbage results that drive wrong design decisions, which the standard method use...
	RE: New Fogstar 15.5kWh upright solution By Batpred, 3 weeks ago Forum Energy Storage
	Ah, great timing, you have a different model of the oven! 😉 Mine is slightly higher capacity.. Did you assemble it yourself and what "CAN protocol" does it use to talk to the inverter? Yup, ...
	RE: Daikin Octopus installation update - I saw my first defrost. 😍😂 By RadWhisperer, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Enable installer mode - 5678 Enter the Space Heating/Cooling menu Enter Pump Operation Mode - Select Continuous or Sample (default) Enter Pump Limit - Select 60%/70%/80%/90% Pump Limit During Sample ...
	RE: Say hello and introduce yourself By Scalextrix, 3 weeks ago Forum Introductions, Forum Rules & Updates
	@jamespa I can relate to your experience somewhat, though not so extreme with my own home. In my own planning for a heat pump, I got a weather station so I could get real data on gas usage for cold da...
	RE: Mixergy Tank Failure By JamesPa, 3 weeks ago Forum Domestic Hot Water & Cylinders
	Could it be looking for higher DT? But this makes no sense when the ft is so low, it only makes sense once the ft has been raised. Something odd!
	RE: Mixergy Tank Failure By bontwoody, 3 weeks ago Forum Domestic Hot Water & Cylinders
	@old_scientist well that's solved one problem 😁 I've raised it to 50C and could feel water circulating in the coil pipework but after a minute the 3 way valved closed. Curious.
	RE: Getting ready for export By Old_Scientist, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	Is your installer MCS certified? If so, they should register the install and provide the paperwork for you.
	RE: Mixergy Tank Failure By Old_Scientist, 3 weeks ago Forum Domestic Hot Water & Cylinders
	It's dimmed like that because it's currently turned off. It will either turn on/off by schedule (daily) or by manually turning on/off on the front panel using the power switch, illuminated on left han...
	RE: Daikin Octopus installation update - I saw my first defrost. 😍😂 By Jancold, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@radwhisperer That is interesting. Can you tell me where you found that setting on the MMI please?
	RE: New Fogstar 15.5kWh upright solution By GGW, 3 weeks ago Forum Energy Storage
	Since this has come alive again - I'll give an update Sunsynk 5.5k Ecco 15.5Kwh Battery Fogstar So far, Fit and forget - has worked (mostly) flawlessly since the firmware update to the P...
	RE: New Fogstar 15.5kWh upright solution By Batpred, 3 weeks ago Forum Energy Storage
	Quick update. 😐 1. The Solis inverter ias turning out a solid and expandable bit of kit. It does "clean" some of the electrical imperfections of my DNO's grid neutral feed not being "r...