Recent Posts

| Forums | Topics

Page 24 / 71 Prev Next

Posts with their shortened content
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	This isn't good enough. I have now managed to render the docx document properly (sorry, had to do it online via what appeared to be a 'disposable' upload) and the 'Tecsurv survey appears to contain - ...
	RE: Heat Pump SCOPs – The Truth Might Not Be What You Think By Old_Scientist, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	We run a standard flow temp of around 32C all year round (certainly between 30-35C) and achieve a comfortable (for us) 20C room temp. Our radiators are all of standard K2 types. Other than on the very...
	RE: Boiling Mad: Exposing Radiatorgate By Mars, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@rob-nezard you can see more of Drei's rad dramas here as part of his overall bodge: And I'm sure @drei will be up for it... Drei let me know if you'd like me to connect you to Rob via email.
	Samsung Controls By Broadsman, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	I have just completed my first year with my Gen 7 12Kwh Samsung and when I went to check the total consumption this am, I found that all records for the last 12 months had been deleted. Last week they...
	RE: Boiling Mad: Exposing Radiatorgate By Rob Nezard, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@editor thanks Mars. Yeah it is a real issue. We are working to drive change through the market but it's a slow process. We are actually pulling together case studies at the moment, @drei would you b...
	RE: Boiling Mad: Exposing Radiatorgate By Mars, 1 week ago Forum Thermostats, Volumisers, Buffer Tanks, TRVs, Pumps, Piping, Valves, Radiators & Controls
	@rob-nezard is the biggest expert I can think of in rads... what do you think Rob?
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	To answer: (a) but I do have the WC set properly, see past posts of charts of my IAT, eg this one. There is simply no need for room stat interference: Attachment : image.png (b) I don't ...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	You need to be a bit careful when using past oil heating based estimates, because it is very likely you did not run the oil heating in the same way as you run a heat pump based system. You may recall ...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	I was just about to do that, and here it is. The CAP columns are the outputs at various OAT and leaving water temps (LWT , flow) in watts. As you may have picked up elsewhere, Midea units suffer from ...
	RE: Midea ASHP – how to set weather compensation By pash44pump, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	This now in answer to my request to provide input assumptions for the heat loss calculations "In the scope document that Sandra shared with you, the details you are looking for can be found on pages 1...
	RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House By JamesPa, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	@drei I will say again that Im sorry to heat about your woes. Despite the fact that my heat pump install has been a sparkling success, Im angry too, albeit for a slightly different reason. I think...
	RE: Seeking Help for In-Principle Quote to fix a botched heat pump installation by Heat Geek Installer By GrahamF, 1 week ago Forum Air Source Heat Pumps (ASHPs)
	@drei I was very sorry to read this heartbreaking story. It is bad enough to feel you have been ripped off, but being cold at home with your family must make it doubly bad. On top of that, you seem ...