Forums

Forums
Sustainable Sidetra...
Government Schemes,...
MCS heat pump pre-s...
 
Notifications
Clear all

MCS heat pump pre-sale information and performance calculation

 
Page 2 / 2
Government Schemes, Regulations, Planning & Organisations
Last Post by IanMK13 8 months ago
13 Posts
8 Users
7 Reactions
1,484 Views
RSS
 IanMK13
(@ianmk13)
Reputable Member Member
Joined: 2 years ago
Posts: 194
20/12/2024 6:57 pm  

Posted by: @johnr
↑

I would agree that knowing the peak daily gas consumption is useful, but not the peak hourly or half hourly as the underlying philosophy for efficient heat pump operation is to keep trickling heat into the building at approximately the rate which balances the heat loss. Sizing a heat pump to give a blast of heat means a more expensive heat pump operating at a higher and less efficient temperature.

 

As I mentioned, a short duration analysis seems to be adequate, but I only discovered after analysing the historical data first.  'Blasts' of energy are best avoided, I agree.  I believe that the thermal mass of the fabric of the house comes into play here - internal brick walls rather than framework partition walls will help - and any potential problems will be mitigated by weather compensation. Some pragmatism may be required and an acceptance that on a handful of unusually cold days it may be necessary to add some clothes or supplement the heating. The challenge is to find the 'sweet spot'.

 


   
👍
1
ReplyQuote
Page 2 / 2
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Members Online

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →