Shelly energy meter
Happy to Google it for you 😉
I think all Shelly devices work the same - by default they'll be broadcasting a WiFi access point (AP) and you can connect your phone to that AP, and then the Shelly has a web interface at IP address 192.168.33.1 - you connect to that and then go into Settings -> WiFi to connect the Shelly to your local network, and go from there.
In simple steps:
- power up the Shelly device
- look on your phone for a WiFi network called "ShellyXXXXXXXX" (usually mentions the type of device)
- once connected, use the browser on your phone to go to http://192.168.33.1
- from that web-page go to settings, and connect to your WiFi (you can set up the details for up to two WiFi networks I think)
(where 'phone' is mentioned above, 'laptop' or 'PC' will do - anything with a WiFi card that can be used to connect to the Shelly)
The Shelly docs are pretty good:
https://kb.shelly.cloud/knowledge-base/shelly-pro-1-web-interface-guide
btw, if you've changed the Shelly to disable its AP (which is wise once you're all set) and you can't find it when you scan for WiFi networks, then there's a reset procedure for the device (usually a small reset button on it somewhere) and that will do what it says on the tin.
Grant Aerona 3 10kW
- 26 Forums
- 2,102 Topics
- 46.2 K Posts
- 94 Online
- 3,388 Members
Join Us!
Latest Posts
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer great you located the source of the issue a...
By Mars , 3 hours ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 12 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
From what you say about the radiators upstairs it does ...
By JamesPa , 18 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 20 hours ago
-
@heacol, if you're around, can you please provide some ...
By Mars , 23 hours ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 24 hours ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 2 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 2 days ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 2 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 2 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 2 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 3 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 4 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 5 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 5 days ago