Forums

Forums
Renewable Heating
Domestic Hot Water ...
Hot water issue, ne...
 
Notifications
Clear all

[Solved] Hot water issue, never seen this before: Grant Heat Pump and Cylinder

 
Page 2 / 2
Domestic Hot Water & Cylinders
14 Posts
5 Users
7 Reactions
3,149 Views
RSS
Tom Sharpe
 Tom Sharpe
(@tomnewarkcylinders)
New Member Member
Joined: 2 years ago
Posts: 1
25/01/2024 9:53 am  

Hi all. A faulty mixer valve sounds like a likely cause to me too. Failing that there could potentially be some cross-flow going on; I notice on the photo of the combination pressure reducing valve, that the balanced cold outlet is plugged. Maybe there's a point in the system at which the higher-pressure cold supply is overpowering the reduced-pressure hot supply, travelling the wrong way down the hot draw off, and subsequently cooling the top of the cylinder down. A bit of a long shot, but this could be something to explore if a mixer valve issue is ruled out.


   
👍
1
ReplyQuote
 Marvinator80
(@marvinator80)
Honorable Member Member
Joined: 3 years ago
Posts: 201
Topic starter 26/02/2024 10:34 am  

@tomnewarkcylinders 

hi Tom, thank you and thanks to everyone else who replied.

it turned out to be a faulty shower that was causing the issue. This was closed off by a plumber and it fixed the issue straight away. Has now been replaced. 

took 3 different plumbers to figure it out but we got there. Nothing to do with the pump or cylinder in the end. 


   
👍
1
ReplyQuote
Page 2 / 2
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →