
Last seen: Sep 9, 2025
If you've recovered 15 tubes which still seem to work, then you could consider using them in a greenhouse environment. Even if they are now only hal...
At what angle? I'm unsure what fluid is within the copper tube, but my understanding is that it changes density, thus rising up to the top when hot....
Hmm. It's unclear from the "glossy" GivEnergy website which features differ between their AC inverters and Hybrid inverters. I've located the manual...
Erm... yes. That's correct. The AC3 is the most basic/standard inverter I could find on the GivEnergy website.And it's rated at 3kW. So your...
I'm just tagging @lucia here, not just because she expressed an interest in an off-grid approach when posting over on the topic about Ofgem's request ...
If that's a 9.5kWh battery from Givenergy, then you must have a separate inverter.They don't do an 'all-in-one' model with that capacity. The batt...
I'm suggesting that you weigh the tubes in order to confirm that the only fault is the loss of vacuum. If all the tubes (hot & cold) still weigh...
If air has replaced the vacuum, then those tubes will weigh more. Put them on kitchen scales and see if there's a difference.
Here we have hazy-sun, manifold reporting 51°Cand the glass is below the temperature of my hand, so I guess you'd describe them as 'cold' I wonder i...
It's difficult to keep the undersides of the vacuum tubes clean, let alone any reflecting surface below it.The lower the angle of the tubes, the worse...
@burtis there's considerable overlap with the list you've just posted and points which we've discussed earlier this year in the (large) topic called I...
Interesting... I'd been wondering if Mars is related to Björn Ulvaeus
- 26 Forums
- 2,158 Topics
- 47.4 K Posts
- 16 Online
- 5,736 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Who’s Caved and Switched the Heating On Already?
I have automated this decision. I have a heat pump with...
By jamespetts , 6 hours ago
-
RE: COP is not the only measure of efficiency
Can I clarify - is the LSV the manual balancing valve? ...
By jamespetts , 6 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Another result and another very happy service customer:...
By ASHP-BOBBA , 7 hours ago
-
RE: Vaillant aroTherm Plus 10kW thoughts?
@realevil the fans and fan speed / coil size (height, w...
By ASHP-BOBBA , 8 hours ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@morgan this can just be done by your sepecilist when t...
By ASHP-BOBBA , 8 hours ago
-
RE: Buffers, hot water and cooling
I agree it seems like a lot of work particularly as its...
By JamesPa , 9 hours ago
-
RE: Anyone still weathering it out with Agile?
@toodles I guess it all comes down to import averages. ...
By Tim441 , 12 hours ago
-
RE: Renewables & Heat Pumps in the News
@mike-patrick Well, if Europe is stalling partly due to...
By Toodles , 12 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
The size of DHW tank affects the anti-legionella cycle....
By Transparent , 14 hours ago
-
RE: Heat Pump SCOPs – The Truth Might Not Be What You Think
@scalextrix Name plate capacity
By HCas , 16 hours ago
-
RE: Solar Thermal DHW and ASHP
I was originally contemplating a solar thermal installa...
By jamespetts , 17 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
My system installed in July 2024 has produced 6.4mWh in...
By jamespetts , 18 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
@judith thanks for your suggestions. Starting from col...
By GrahamF , 2 days ago
-
RE: Inventor (Midea) Heat Pump short cycling advice
I switched to "fan coil mode" to be able to set water t...
By immunity , 2 days ago
-
RE: DESNZ doing a survey which asks the right questions!
Without a survey their only source of data is probably ...
By JamesPa , 2 days ago
-
RE: Can you help with our research: solar panels, EV chargers, home batteries, heat pumps?
Just done your survey!
By Judith , 2 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
@cleardene-ashp just thinking about your issues here. Y...
By Judith , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
@cathoderay OK let's wait and see, it sounds an interes...
By Tasos , 3 days ago
-
RE: What is the Heat Geek Guarantee?
@judith, I’m with you on Heat Geek, but there really do...
By Mars , 3 days ago