
Last seen: Sep 9, 2025
On your earlier photos you had the flat-plate copper busbars connecting to the positive terminals of the cells, which were closest to the front edge o...
You require Constant Voltage mode. You're bringing all cells up to the same 3.6v (or whatever you choose). Use a multimeter to see what's actually b...
Low voltage and high current is typically a short-circuit. Have you got one or more of the cells reversed? The positive terminals should all be conn...
It's meant to the other way around. Levelling Up is a policy which must be adhered to throughout all aspects of Government action: From the Levellin...
Valid point. Levelling Up is Government Policy. I have already alerted my MP to another aspect of Levelling Up which has been ignored/overlooked by ...
I'm not sure that is a statutory requirement. When I installed my thermal store in a renovation project in 2005, Part L1b of the Building Regulation...
Welcome to the forum @tommyt11 I don't think that the Mixergy tank has been described here before. I'm aware of it because of discussions on another...
If I were trying to identify those who might not have concerns about electricity & gas being consumed for luxury, then I'd include most MPs and di...
That's good @batalto The first step is to first decide on what voltage you are going to use as the upper limit. This will typically be just above 3....
I'm interested in those comments @diverted-energy Back in 2013 when the specification was laid down for our Smart Meter Network, there was a feature...
Whilst we won't see Nationalisation as historically defined, the new RIIO contracts agreed with Ofgem provide for much greater involvement from us end...
When, this coming winter, children arrive at school cold and hungry, young single mothers queue up at food banks, and pensioners die from hypothermia,...
- 26 Forums
- 2,158 Topics
- 47.4 K Posts
- 67 Online
- 5,736 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Buffers, hot water and cooling
Seems a lot of work with hit or miss results and potent...
By dgclimatecontrol , 24 minutes ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@dgclimatecontrol I have no intention of removing the...
By Morgan , 31 minutes ago
-
RE: 300 Liter Tank - Do I have to heat it all?
The size of DHW tank affects the anti-legionella cycle....
By Transparent , 34 minutes ago
-
RE: Renewables & Heat Pumps in the News
In the FT today, a report that heat pump take up in Eur...
By Mike Patrick , 35 minutes ago
-
RE: Anyone still weathering it out with Agile?
@tim441 As you say Tim, very difficult to quantify any ...
By Toodles , 2 hours ago
-
RE: Who’s Caved and Switched the Heating On Already?
@abernyte Our heating has come on twice in the last wee...
By Toodles , 2 hours ago
-
RE: COP is not the only measure of efficiency
James, I would not question your findings and realise t...
By Toodles , 3 hours ago
-
RE: Heat Pump SCOPs – The Truth Might Not Be What You Think
@scalextrix Name plate capacity
By HCas , 3 hours ago
-
RE: Solar Thermal DHW and ASHP
I was originally contemplating a solar thermal installa...
By jamespetts , 4 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
My system installed in July 2024 has produced 6.4mWh in...
By jamespetts , 5 hours ago
-
RE: Vaillant aroTherm Plus 10kW thoughts?
Good unit. And the 10 kW is the same as the 12 kW I ...
By HCas , 24 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
@judith thanks for your suggestions. Starting from col...
By GrahamF , 1 day ago
-
RE: Inventor (Midea) Heat Pump short cycling advice
I switched to "fan coil mode" to be able to set water t...
By immunity , 1 day ago
-
RE: DESNZ doing a survey which asks the right questions!
Without a survey their only source of data is probably ...
By JamesPa , 1 day ago
-
RE: Can you help with our research: solar panels, EV chargers, home batteries, heat pumps?
Just done your survey!
By Judith , 2 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
@cleardene-ashp just thinking about your issues here. Y...
By Judith , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
@cathoderay OK let's wait and see, it sounds an interes...
By Tasos , 2 days ago
-
RE: What is the Heat Geek Guarantee?
@judith, I’m with you on Heat Geek, but there really do...
By Mars , 2 days ago
-
RE: Electricity price predictions
Community energy installations are a great idea, but th...
By Scalextrix , 3 days ago