Last seen: Jan 8, 2025
Right, it's done. I went a bit lower than I was going to. 45C water flow temp. @ -3C outside air temperature. 20C water flow temp. @ 18C ou...
@morgan, I just used this to set mine. It tells you how to set the baseline and move up and down.
@morgan, the screen with the big graph and numbers is where you define the baseline graph. Yours is currently a 50-30 shape. This defines what outsid...
@morgan, probably best listening to @heacol re compensation curve. I was close, but not quite right.
@morgan, it refers to the weather compensation curve. It means a flow temp of 25 at 20 degrees ambient (outside) temp and 45 at zero. It you look ...
@heacol, @derek-m Thanks Brendan and Derek. You're confirming what I already suspected. As soon as I started looking at the MMSP data a month ago...
My turn now so be gentle! As suggested, I'm posting my system details here for comments; especially from @derek-m and @heacol Brendan. Hopefully i...
@batalto, not sure I understand. Are you using degrees Celcius? I see what you're trying to do but what happens when ambient temp gets to, or close t...
@jane, an interesting experience. I'm now leaning towards having the heating on the same all the time too. I've yet to experience a winter as we got o...
One will be an expansion vessel for the cylinder. This is mine; the only one I have.
Latest Posts
-
I have/had a basic non-hybrid FoxESS inverter. The soft...
By Old_Scientist , 3 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
Ooch that's a lot. I replaced my pumped shower with ...
By JamesPa , 3 hours ago
-
RE: Mitsu Wireless Controller and MelCloud
@robs Hi Rob, At the end of a note to Mitsu UK, thank...
By DavidAlgarve , 5 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
What limit are you speaking of. So far I was aware dno...
By JamesPa , 15 hours ago
-
RE: Why so many sigenergi installer recommendations?
@adamk Tesla is a great option, it’s also one we instal...
By SAEnergy , 16 hours ago
-
RE: Rodents! A word of warning for heat pump owners
Hradline in Telegraph: Brace for plague of rats after s...
By Tim441 , 21 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
As a potential heat pump customer, it would be good to ...
By Temperature_Gradient , 24 hours ago
-
RE: Octopus replacing the fixed 15p/kWh export rate with a market tracking one
@trbob I have just extracted the details for Agile Expo...
By Toodles , 1 day ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
The Ultimate Guide to Heat Pumps is less than a month a...
By Mars , 1 day ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 2 days ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 2 days ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I estimated our usage on the following basis. The mos...
By Old_Scientist , 2 days ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 3 days ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 4 days ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 4 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 4 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 5 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 6 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 6 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 1 week ago
