Activity
 
Notifications
Clear all
Kev M
@kev-m
Member
Famed Member
5606 kWhs
Joined: Mar 5, 2021
Last seen: Jan 8, 2025
Topics: 10 / Replies: 1266
Reply
RE: Vaillant arotherm plus 7KW electric usage

As you've pointed out, it's very cold and these are about the worst sustained conditions your ASHP is likely to encounter. 40-50 kWh/day for a 4 bed ...

2 years ago
Reply
RE: Tepeo ZEB

Its capacity is 40kWh. That's not going to last very long in winter then you'll be on to peak rates. It is what it is I suppose - a big storage heat...

2 years ago
Reply
RE: 17kw Grant Aerona heat pump not performing

That looks to me like two things are happening. The large drops in flow are the thermostats turning the ASHP off. This happens at about 7, 9 and 10pm...

2 years ago
Reply
RE: Mitsubishi ecodan 11kW ridiculously expensive running costs. Help!

This is more likely to be defrosting. (The term cycling is usually used where the ASHP can't modulate down low enough where the load is low) My Ecoda...

2 years ago
Reply
RE: Mitsubishi ecodan settings

For the thermostat, yes, I would put in the living room if you can live with the hall being colder. A couple of degrees is normal but keep your door c...

2 years ago
Reply
RE: Mitsubishi ecodan settings

HW depends on your usage pattern but if you can get away with once or twice a day that should be better. Whenever HW comes on the heating stops so it...

2 years ago
Reply
RE: Mitsubishi ecodan settings

This one is a good explanation of different heating modes and this one for timing heating/HW. The most efficient way to run it is on weather...

2 years ago
Reply
RE: Clarification needed for Ecodan ASHP settings

@tufty It's an expensive time for ASHPs (and other heating systems). My COP has been 2.8 for the last 4 days. Lower today I think.

2 years ago
Reply
RE: Method for monitoring ASHP usage/efficiency in real time?

This is how you hook up power and electricity meters. They are separate connections so I assume you can do one without the other. T

2 years ago
Reply
RE: Method for monitoring ASHP usage/efficiency in real time?

You can see the current day; just overwrite the dates. You can keep the report open and press the energy button to update it. Not quite real time but ...

2 years ago
Page 32 / 107
Share:

Join Us!

Heat Pump Dramas?

Thinking about installing a heat pump but unsure where to start? Already have one but it’s not performing as expected? Or are you locked in a frustrating dispute with an installer or manufacturer? We’re here to help.

Pre-Installation Planning
Post-Installation Troubleshooting
Performance Optimisation
✅ Complaint Support (Manufacturer & Installer)

👉 Book a one-to-one consultation now.

Latest Posts

x  Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
Shield Security