Last seen: Jan 3, 2024
@jamespa which if you read my comments, I also suggested this.
@jamespa we get over 15% efficiency gain without a buffer. I've commented on this thread a number of time, if you continue to believe the dinosaur h...
Sound like your have a TPI third party controller on the system.
What control do you have on the system. Make and model pls
@derek-m Interesting reading your post I have a few comments. Because us engineers have carry out a full heat loss (instead of over size guessin...
@william1066 im still running fixed speed pump on open loop system/samsung, very happy with the results.
@iantelescope run the system open loop, adjust the curve settings down so you are not overshooting in comfort temperature. Most systems I install, ...
@timatheronwood sounds undersized, or short of refrigerant. Or could be poor design. Most of the Daikin engineers don't really know about heating desi...
@william1066 after installing our first Mixergy a few years back, I was unimpressed. Since then we have installed/converted older invented cylinders...
I have had the pleasure in working with clients who believed in my proposed setup, (which is not new). So the system consisted of heat pump and syst...
As @heacol says, some of us already have been installing low temp, heat pump ready systems for years. I have put design and efficiency over the so ...
@heacol you sound so like me.
Latest Posts
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 5 hours ago
-
RE: Mitsubishi cycling while on chilled water output
I absolutely wouldn't remove the buffer altogether, I'd...
By JamesPa , 11 hours ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 13 hours ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 2 days ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 2 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 2 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 2 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 3 days ago
-
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 4 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 4 days ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
@m1kegibson If you are able to access the service me...
By HarriUp , 5 days ago
