Last seen: Jul 2, 2025
UFH should never be at 50C since small feet can get burned. I think the regs say 39(?). But your floor covering could be damaged too unless it’s tile ...
20miles away is not too far for a good install. Our installation was done by a guy who lived about 25miles away but some of his subcontractors (who ch...
Key to this discussion is compressor performance. John Cantor addresses this at the end of his very useful YouTube video on ashp cycling. He shows one...
That’s just a guess, and your usage patterns may vary. It might be worth trying to work it out for your circumstances. If you want to improve your c...
If you have a decent export tariff such as Octopus’s 15p then you use the export to build up your cash in your account over the summer and then spend ...
@jamespa not found the hysteresis to be a problem yet. The house warms up a lot in the sunshine so it’s only back to our desired temperature by later ...
Ours is 1000 starts in 3200 hours running time over 6months. So twice the rate of James, but again nothing I will worry over. Nice discussion from M...
@jamespa use expanded mode! It’s ideal for that, and I’ve just moved back to it.
@gary thanks for that link. A very useful analysis and I’m pleased to read the author’s view corresponds to my quick glance on it being some batches. ...
@eliuccio there are some very high level arguments in this thread which will be challenging at first read. Since you want to make a decision perhaps t...
Nice data set Gary. Tesla clearly had a quality issue with the PW in 2019-20, in that many are showing much reduced capacity even with few cycles. We...
Our Vaillant at present (outside temp 18C and the heat pump is off since internal temperature is above the set point) has a target temperature for wat...
Latest Posts
-
Heat pump solutions and/or installer recommendations for France
I am looking for heat pump solutions for a home I'm buy...
By Bravo4 , 5 hours ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 9 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 18 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 20 hours ago
-
RE: Mitsubishi cycling while on chilled water output
I absolutely wouldn't remove the buffer altogether, I'd...
By JamesPa , 1 day ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 1 day ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 2 days ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 2 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 3 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 3 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 4 days ago
-
@hughf, I think we’ll organise an RHH session at Instal...
By Mars , 5 days ago
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 5 days ago
