Last seen: Sep 22, 2025
Are you certain of 6.5C, Have you checked the actual temperature at the output of the Samsung?. If so, are the pipes insulated and are the flow rates...
Im not sure how helpful the analogy is. The key point is that the buffer is (at DC) most probably a relatively low impedance path compared to the hea...
Good, we agree then! The problem is to persuade @iantelescope and, more to the point, his installer. My personal theory (based on what @iantele...
Sorry, but I don't believe in buffers (unless there is a proven need) and there won't be one in my system. OP asked where to put a buffer in his curr...
I can see that works when there is no HEX. Basically if the rads are wide open the low impedance route is through the rads, if they close then the bu...
I guess that there is an employee protection argument. My garage takes a video when it does its service. I've never bothered to watch thus not su...
In the return, two pipes only. All it does is increase system volume. By putting it in the return not the feed its at a slightly lower temp, which s...
@iantelescope If it works, and it sounds like it does, that's great. The only things to remember are that the rads/pipework are probably design...
Rest assured your secret is safe. One of the joys of this forum is that we all learn from others and benefit from peer review. That said, my 2 year...
@iantelescope I'm not actually sure, and if somebody else knows I'd listen to them. In the absence of that, for starters I'd control the radiator ...
You are correct, its the greater of (bedrooms +1 or actual occupancy)*45l. See however my comments above about the flexibility in MIS3005-D, although...
Latest Posts
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
@grantmethestrength, if you pull the trigger on the FRV...
By Mars , 3 hours ago
-
RE: How to choose Towel Rails for an ASHP
@judith Yes I agree. They are extremely expensive. ...
By GrahamF , 4 hours ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@downfield I have never added a buffer sensor as we nev...
By ASHP-BOBBA , 4 hours ago
-
Riello NXHM Monobloc Air Source Heat Pump
Hi, does anyone have any feedback on Riello NXHM Monobl...
By dgarvey , 11 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
This is actually based on the same chipset as the Svena...
By Grantmethestrength , 15 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
@adamk what you need is enough battery size to cover 3 ...
By Judith , 21 hours ago
-
-
RE: Say hello and introduce yourself
@jarlatheoin do put the MVHR in early it’s not an easy ...
By Judith , 21 hours ago
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 21 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 23 hours ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 2 days ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 3 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 3 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 4 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 4 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 6 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 6 days ago
