Forums

Forums
Members
JamesPa
Activity
 
Notifications
Clear all
JamesPa
@jamespa
Moderator
Illustrious Member
Joined: Apr 3, 2023
Last seen: Sep 13, 2025
Profile Activity
Topics: 17 / Replies: 2840
AllTopicsReplies
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

Well that's not really a reason. If he had said "because the index circuit has a resistance that is too high for the water pump" that would be a rea...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: How do the settings on my Gen 5 Samsung ASHP sound?

A buffer tank will be a cylindrical tank other than your DHW tank, or could be attached to your DHW tank.

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency

It's unlikely you need 2 pumps, did he say why?

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: How do the settings on my Gen 5 Samsung ASHP sound?

In that case Id perhaps expect your loss to be less. Do you have a buffer tank and if so how many ports (usually 2 or 4). How are the upstairs radia...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: How do the settings on my Gen 5 Samsung ASHP sound?

Difficult to say without more information about the house however, for comparison, my 200sq m 1930s house with a mish mash of fabric upgrades (includi...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Vaillant Arotherm ASHP gets noisier when it gets colder outside

Quite possibly. As I mentioned above the 'ideal' product seems only to be available in the EU. There is a UK product which looks like grass, (and th...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Best temperature wave form for best economy and efficiency .

In general lower FT = higher efficiency. These are only 1C apart however and with different outdoor temps, but perhaps more importantly both have ...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: ASHP and how it should run and potential kw consumption?

Consumption is not that much different to mine when it was very cold. You wont be getting a COP of 4 when its -3~-5 outside, more like 3 or possibly ...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Is it crucial to get flow temperatures with heat pumps right?

The bodies of TRVs usually have an arrow on them. If it can operate bidirectionally it will be a bidirectional arrow!

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Vaillant Arotherm ASHP gets noisier when it gets colder outside

Thanks for the suggestion. This appears to have a solid shiny surface and be designed to reduce transmission. I think what I need to do in my s...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Vaillant Arotherm ASHP gets noisier when it gets colder outside

My 7kW Arotherm does the same. Its especially noticeable during recovery from defrost, when the compressor is going at 100%, and at this point its ha...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Reply
RE: Is My Midea Heat Pump Inherently Defective?

Sadly I think you are right, until someone develops a cost effective no-frost coating which can be applied and prevents (or reduces) condensation buil...

8 months ago
Forum
Air Source Heat Pumps (ASHPs)
Page 115 / 239
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →