Last seen: Jun 27, 2025
Have you had a chance to look at hydraulic diagram 6.1.1 in the thermal store manual? The thermal store is not part of the CH loop at all, it’s sole p...
Awesome, that should see a real benefit in performance. Are you running on just the internal midea pump or do you still have ‘Pump-O’ wired up and run...
Absolutely... Use the room stats as hi-limit stats only, set them a couple of degrees above what you find comfortable. Then adjust the weather compens...
Provided the system is plumbed as per 6.1.1 then it works as follows: When in DHW mode, the hot working fluid travels from the ASHP to 3 port valve ...
@marzipan71 Wow, that's quite the complex beast isn't it. Two F-Gas circuits, an r410a to r134a heat exchanger and another compressor inside the indoo...
Plumbing schematic for this system is figure 6.1.1 for anyone who's interested.
User manual for the 500Ltr solar thermal compatible TS is attached. Interesting bit of kit, not sure how well suited it is for a ASHP install because ...
I assume, from the picture, that the 500ltr TS has a coil for generating your DHW in it (with what appears to be 29 ltrs capacity)? If so, you're goin...
Absolutely you can run the mixed UFH circuit at a different (albeit always lower) temp than the unmixed circuit. The blending valve that you can see i...
For the benefit of the tape, the way your system is setup @marzipan71 is that you have a mixed (for ufh) and an unmixed pump group, connected to a hor...
I should have clarified, an ASHP install with a single emitter type (rads or ufh) would not require a separate weather comp’d mixer. With different ...
you wouldn’t need a weather compensated mixing valve in an ashp install as the ashp already has weather compensation. This is for the edge case wher...
- 26 Forums
- 2,177 Topics
- 47.9 K Posts
- 52 Online
- 5,748 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
It’s been a seriously intensive week and Brendon’s graf...
By Mars , 2 minutes ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@ashp-bobba might be able to help as an Ecodan expert.
By Mars , 45 minutes ago
-
RE: Boxt Heat Pump Installation Experience
@andrew-j-h looking forward to seeing if it attains the...
By Mars , 55 minutes ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 1 hour ago
-
RE: Who's your electricity provider and what's your tariff?
@toodles Fun fact the free electricity session is techn...
By Andrew J H , 11 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
Thanks- interesting and useful observations and I did n...
By benson , 13 hours ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 19 hours ago
-
How to Zone with a Single Room with UFH
Hi all, I am currently looking at a project ...
By Renewables345 , 19 hours ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 23 hours ago
-
RE: Say hello and introduce yourself
@transparent Morning. Just put a lengthy post on the AS...
By sbm74 , 1 day ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 1 day ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 2 days ago
-
RE: Powerwall 3 or Myenergi or something else?
Yes I was thinking of outdoor, IP65 batteries with buil...
By Temperature_Gradient , 2 days ago
-
@jamespa Thanks. Yeah any adjustments Ive made at pr...
By cliffhanger , 2 days ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 4 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 4 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 4 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 4 days ago