Last seen: Sep 19, 2024
I fully agree with the assessment by James, home heating is a complex subject. Not because the Physics are particularly difficult, but because of the ...
@cathoderay To be honest I was not going to spend any further time analyzing the data from your system, but your comments about your particularly ba...
I would suggest repeating the test with a more reliable method of measuring the temperature, since if the readings were taken at 20 second intervals, ...
Yes, you are correct. Whilst it is not what I believe happens in the real World, in CathodeRay's system he already has his version of AA mode varying ...
CathodeRay's data provides the OAT and the IAT at hourly intervals. The model needs to adjust the energy output to represent what the heat pump contro...
James, I think that you pointed out some time ago that it is the heat emitters, along with the heat loss, that dictate the required thermal energy out...
Hi James. The raw data is the hourly records provided by CathodeRay recently, I think that you have been working with a copy. I took the data on f...
You are perfectly correct, it does not matter. Well not to me, anyway.
@cathoderay But what happens if the OAT reading varies from 0C to 3C deviation with heat pump loading?
@jamespa Attached is a copy of the test results from the raw data for the period 5th November 2023 to 20th November 2023. I don't see any point in...
@cathoderay I don't follow your logic. You expect to use the OAT reading to predict the Energy In to your heat pump, but this OAT reading would appe...
@jamespa I suspect that some of the wider variation in OAT during the setback data, is probably due to the heat pump being stopped for a lengthy per...
Latest Posts
-
@judith Applied for replacement from installer. If...
By cliffhanger , 11 minutes ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
The real answer is trial and error, because there are a...
By cathodeRay , 1 hour ago
-
@drei Id be wary of the reference in quote 1 to reattac...
By benson , 16 hours ago
-
RE: Renewable Heating Hub WhatsApp Channel
I clicked on the link and have WhatsApp on the computer...
By dgclimatecontrol , 16 hours ago
-
RE: Repiping and Reconfiguring our Heat Pump System Including Removing the Buffer Tank
@editor yeah i looked at those but id need 12+ for my p...
By AdamK , 17 hours ago
-
RE: Say hello and introduce yourself
Thanks for the warm welcome @editor and can't wait to b...
By Pirate Rich , 19 hours ago
-
RE: Powerwall 3 or Myenergi or something else?
Let's also bear in mind that Fogstar supply more than o...
By Majordennisbloodnok , 21 hours ago
-
RE: How to choose Towel Rails for an ASHP
@judith Yes I agree. They are extremely expensive. ...
By GrahamF , 1 day ago
-
RE: Which temperature sensor for a Steibel buffer and Ecodan?
@downfield I have never added a buffer sensor as we nev...
By ASHP-BOBBA , 1 day ago
-
Riello NXHM Monobloc Air Source Heat Pump
Hi, does anyone have any feedback on Riello NXHM Monobl...
By dgarvey , 1 day ago
-
RE: How to Zone with a Single Room with UFH
We have exactly what you describe, one utility room wit...
By Judith , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@agentgeorge Come the Ist of October, the Cosy cheapest...
By Toodles , 2 days ago
-
RE: Boxt Heat Pump Installation Experience
@ashfp Mine does have a buffer tank. That was my experi...
By Andrew J H , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
I'm sure you are right, I was just trying to understand...
By JamesPa , 3 days ago
-
RE: Preparing for 2nd winter in new build house.
Yuch! So that's basically just an on/off control. I...
By Transparent , 4 days ago
-
Good day everyone. I'm new here and have a few question...
By Edin67 , 4 days ago
-
RE: MCS certificate SCOP vs real-world performance
That may be contributing to lower than expected SCOP. ...
By JamesPa , 4 days ago
-
-
RE: Mitsu PAR-WT60R Wireless Controller - options
How it does it's job is something of a mystery although...
By Abernyte , 5 days ago
