Last seen: Sep 19, 2024
It bodes the question "if 600mm high radiators will not fit, why were they specified"? Will 400mm high radiators fit?
Unless you instigated the changes, I would certainly question why the originally specified radiators were changed to the ones actually installed.
@crimson According to the heat loss calculations the design called for two K2 600mm x 1400mm radiators in both Living Room 1 and Living Room 2. Each...
As I have often told young Engineers, "If all else fails, read the instructions".
@crimson Please feel free to DM if you wish.
@crimson The other important aspect to confirm is that the total capacity of the heat emitters is capable of emitting 7.86kW of thermal energy with ...
From the information just provided, I suspect a 10kW heat pump would have been more than adequate. As @heacol has indicated it will be impossible to...
I would suggest that you start by reducing the frequency of cycling, by trying to balance the flow rate through the LLH. I suspect it will be necessar...
Try tapping the side of the valve and/or pulling the stem up.
@crimson The valve stem should be up to open and down to close. For living areas it may be best to remove the actuator and leave the valve fully ope...
@crimson Try removing the TRV heads and check that the valve stems move freely, and by approximately the same amount of travel. With regard to the...
If you read back in the thread I did suggest changing the LLH into a small volumiser rather than fully removing, but maybe something to consider once ...
- 26 Forums
- 2,136 Topics
- 46.8 K Posts
- 40 Online
- 5,662 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Why so many sigenergi installer recommendations?
@adamk Tesla is a great option, it’s also one we instal...
By SAEnergy , 4 minutes ago
-
RE: Rodents! A word of warning for heat pump owners
Hradline in Telegraph: Brace for plague of rats after s...
By Tim441 , 4 hours ago
-
What crazy nonsense are inverter limits and why are they imposed?
I’ve recently found out a DNO can impose an inverter li...
By AdamK , 6 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
As a potential heat pump customer, it would be good to ...
By Temperature_Gradient , 7 hours ago
-
A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
I felt it would be helpful to share some lessons about ...
By GrahamF , 8 hours ago
-
RE: Mitsu Wireless Controller and MelCloud
Hi David We have an FTC7 but the settings seem to be ...
By RobS , 13 hours ago
-
RE: Octopus replacing the fixed 15p/kWh export rate with a market tracking one
@trbob I have just extracted the details for Agile Expo...
By Toodles , 14 hours ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
The Ultimate Guide to Heat Pumps is less than a month a...
By Mars , 15 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 1 day ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 2 days ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I estimated our usage on the following basis. The mos...
By Old_Scientist , 2 days ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 3 days ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 3 days ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 4 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 4 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 5 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 6 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 6 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 7 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 7 days ago