Last seen: Sep 19, 2024
The mixing valve arrangement, and the water pump above it, is as you say primarily for systems where the supplied water is above the temperature limi...
@jamespa The UFH mixing valves are shown in the final 2 photo's in the original post.
@ngillam Check the thermistor readings as detailed in the attached video. If the controller is indicating -39C then check to see if the control...
@iantelescope Thank you for providing the graph for sensor 1. Could you now please supply the graphs for sensor 3 and sensor 7 as requested. Ple...
@iantelescope How many radiators are on your system and are they all being heated?
Thank for supplying the model number for the energy meter. Could you please explain why you included the additional information that was not requeste...
@iantelescope Could you please confirm the model of Sharky that you have installed. I'm afraid that I am becoming confused by the multitude of gra...
@iantelescope Is the secondary water pump starting and stopping?
@iantelescope As an Instrumentation and Control System Engineer, the starting point is always to ensure that all sensors are correctly installed, th...
@toodles During a 24 hour period our baseload is in the 100W to 300W range with occasional dips below and surges above. Assuming a 200W / hr average...
@iantelescope Please explain what you mean by 'errors galore'. Please explain how you are monitoring and recording the various signals from the se...
@iantelescope Thank you for the Sharky readings, but could you please include the units and any decimal points. Please don't go off at a tangent o...
- 26 Forums
- 2,136 Topics
- 46.8 K Posts
- 30 Online
- 5,662 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Rodents! A word of warning for heat pump owners
Hradline in Telegraph: Brace for plague of rats after s...
By Tim441 , 4 hours ago
-
What crazy nonsense are inverter limits and why are they imposed?
I’ve recently found out a DNO can impose an inverter li...
By AdamK , 5 hours ago
-
RE: Why so many sigenergi installer recommendations?
@saenergy for me I feel the powerwall gives me for flex...
By AdamK , 5 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
As a potential heat pump customer, it would be good to ...
By Temperature_Gradient , 6 hours ago
-
A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
I felt it would be helpful to share some lessons about ...
By GrahamF , 7 hours ago
-
RE: Mitsu Wireless Controller and MelCloud
Hi David We have an FTC7 but the settings seem to be ...
By RobS , 12 hours ago
-
RE: Octopus replacing the fixed 15p/kWh export rate with a market tracking one
@trbob I have just extracted the details for Agile Expo...
By Toodles , 13 hours ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
The Ultimate Guide to Heat Pumps is less than a month a...
By Mars , 14 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 1 day ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 1 day ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I estimated our usage on the following basis. The mos...
By Old_Scientist , 2 days ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 2 days ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 3 days ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 4 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 4 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 5 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 6 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 6 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 7 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 7 days ago