Last seen: Sep 19, 2024
You will probably need to change the speed of the water pump external to your heat pump to change the flow rate.
Hi Kev, It would appear that you can deactivate the 'freeze stat' function as shown below. Freeze stat functionMenu subtitle Function/ Description...
@cathoderay Thanks for that. In SCADA systems there are normally two ways that data is passed from computer to computer, one is by timed polling o...
Assuming that the original heat loss calculations were reasonably accurate, at an outside temperature of 2C, you should expect a heat loss of approxim...
Sorry, it is per hour, but only when it is -2.2C outside. At -5C it will be more. 😋
What made me question your installation, is the water pump is normally located on the return pipe, but it will still work on the flow pipe.
If the pipes going through the wall on the left-hand side of the photo are going to the heat pump, I would suggest that you check which is the flow an...
@cathoderay To answer your first question. but if it puts it the 'next time slot in the Cloud record' then why doesn't the bar displayed in the 18...
I assume that you are changing the water pump speed on the FTC controller, but if the actual water pump is not wired the controller, then changing the...
I would have expected that the above should have been set by your installer, for example, if you have a 3kW immersion heater installed then the releva...
Looking at the photo I suspect that the upper sensor is not making good thermal contact, particularly at the end section where the sensor is often loc...
Latest Posts
-
That's probably the most important point, maybe see if ...
By cathodeRay , 54 minutes ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 1 hour ago
-
RE: How to choose Towel Rails for an ASHP
@jamespa yes, to essentially prevent them consuming unn...
By Mars , 2 hours ago
-
Thank you for raising your concerns. Customer safety, s...
By Mixergy , 4 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 4 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 4 hours ago
-
@jamespa Ours is a Daikin EDLA03 8 kW and the Delta T =...
By Toodles , 5 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
Day one is done. The system’s been fully flushed and ...
By Mars , 19 hours ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 21 hours ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 21 hours ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 22 hours ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 1 day ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 2 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 2 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 2 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 4 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 4 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 5 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
I realise im overdue an update on my situation. first...
By Cleardene-ashp , 5 days ago
