Last seen: Sep 19, 2024
I take it that you are looking at the red line and not the blue line.
For optimum performance a heat pump should be operated at a low LWT that is consistent with reliable operation. The thermal energy output of a heat ...
If you operate the system as suggested you should not require a volumiser and definitely not a buffer tank. Let me try to explain how a heat pump sy...
If you wish for your system to operate in a more reliable and efficient manner I suggest that you try the following. Turn all the room thermostats t...
I would suggest that you do not get too concerned about controlling the speed of your water pumps. The primary reason to vary the speed of a water p...
What's that saying "measure twice, cut once". I wonder if the 'surveyor' received a promotion to 'manager'?
It is easy to compare the estimated output of different radiators using the calculator I provided. To estimate the thermal energy output of the type...
The standard output capacity of a radiator is specified at DT50, so if the IAT is 21C, the average water temperature would need to be 71C for the radi...
@mellow Is it possible to set this timer to be 'off until 10:00' and then 'on until 14:00'?
@heacol Thank you Brendon, though I would much prefer the information in table format which provides a great deal more detail.
Unlike a number of heat pump manufacturers, Daikin appear reluctant to publish heat pump data tables, or at least I have not yet found any. The prim...
I'm from the old school, I much prefer hanging, drawing and quartering. 😋
- 26 Forums
- 2,136 Topics
- 46.8 K Posts
- 10 Online
- 5,662 Members
Join Us!
Podcast Picks
Latest Posts
-
Sanity check please. Battery storage and inverter sizing.
I had one installer essentially wanting to install a ti...
By AdamK , 7 hours ago
-
Why so many sigenergi installer recommendations?
I’m curious as to why I’m seeing so many YouTube vids a...
By AdamK , 7 hours ago
-
RE: Rodents! A word of warning for heat pump owners
The gaps and holes have reduced on heat pumps over the ...
By dgclimatecontrol , 13 hours ago
-
RE: Ecodan & MelCloud scheduling
I couldn't agree more. I might go so far as to change t...
By Majordennisbloodnok , 13 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: EGP01 Manufacturer: Samsung Model: 8K...
By EGP01 , 16 hours ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 17 hours ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 18 hours ago
-
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 2 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 3 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 3 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 4 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 4 days ago
-
RE: Anyone still weathering it out with Agile?
I went to Agile when I had solar installed July last ye...
By NJT , 4 days ago
-
RE: Mitsu Wireless Controller and MelCloud
Well it has now become obvious that the installation of...
By DavidAlgarve , 5 days ago
-
RE: Say hello and introduce yourself
Whilst you're busy installing services (pipes and wires...
By Transparent , 6 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@editor I know it was formally announced at Ish the oth...
By PatrickVito , 7 days ago
-
@moman0311 welcome to the forums. I've received your em...
By Mars , 7 days ago
-
RE: Thermostat for Ideal Logic Air with 3 zone support
No harm at all in plumbing it as 3 zones, I would have ...
By JamesPa , 1 week ago
-
RE: ASHP heat output monitoring
@carlo I see there is a discussion in Facebook user gro...
By Tim441 , 1 week ago