
Last seen: Sep 30, 2025
Yes, all the stuff I have found is for Midea AC units, but I reason they might be very similar. I also tried using midea-discover (after pip instal...
Indeed, I have contributed to these other discussions. There is no doubt the data is there, and it also seems equally beyond doubt that the manufact...
Exactly, this is the problem I have, and it happens even with a small setback to say 16 degrees, but that has the effect of turning the heat pump off ...
Very interesting Kev. There has always been a lot of smoke and mirrors on this subject, extra energy need to raise rather than maintain temperature et...
@batalto - I have been looking at the Midea controller 'Operation Manual' (the small ~4in x 4in white booklet with the QR codes on the front) that cam...
And of course it doesn't need electricity to run, very useful in power cuts. I do have an inglenook, but it has an open fire on fire dogs with a large...
@allyfish - thanks for clarifying. I think the important point is that marginal units, and even some not so marginal units, will struggle in colder we...
@batalto - one of the upstairs rads is 2 degrees warmer than the others which are all within half a degree of each other. I tightened the hotter one b...
Is this correct, I wonder? I'm getting at the old energy vs power thing again. Isn't the (max available) power (in kW or could for example if it was a...
@batalto - they are as balanced as I can get them (mostly by lockshields, starting full open then closing in stages in turn, then final tweak where ne...
Some conclusions from last week's figures. It was an interesting week, insofar as the ambient temp was at or very close to design temp for a sustained...
I think it may well be glued to the exchanger, it is certainly glued to itself, ie top to sides, and because of the way the exchanger has been install...
- 26 Forums
- 2,197 Topics
- 48.4 K Posts
- 59 Online
- 5,854 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Heat Pump + Tado Setup: Smarter Control for Secondary Pumps?
There is no straightforward way to maintain excellent c...
By Pirate Rich , 26 minutes ago
-
RE: Rodents! A word of warning for heat pump owners
I think similar care should be taken against vermin ing...
By Transparent , 46 minutes ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
From my understanding.. The short version ...
By Tim441 , 47 minutes ago
-
RE: Samsung Gen 6 - Schedules not working
@bontwoody have you checked you have not set any holida...
By TechnoGeek , 47 minutes ago
-
RE: Why Air Release Valves and Deaerators are Non-Negotiable
We have a manual air release valve on top of the Grant ...
By AllyFish , 53 minutes ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
I'd love to take credit but I think it was @bontwoody. ...
By Majordennisbloodnok , 1 hour ago
-
RE: Large heat pump options for church building
Hi Mars thanks for the mention. Church projects are n...
By Aventus Eco , 4 hours ago
-
RE: Heat Pump Installers: Competence, Illusion and the Hard Truth Homeowners Must Face
Agreed. There’s tricky, and then there’s diving into a ...
By Mars , 4 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@dgclimatecontrol yes the wall fixings are mostly aroun...
By AdamK , 14 hours ago
-
@majordennisbloodnok And of course, ‘No deliveries betw...
By Toodles , 20 hours ago
-
RE: Do I just go with the lowest quote for my heat pump?
@jancold 😆 Toodles.
By Toodles , 22 hours ago
-
RE: Moving FIT array onto a Tesla Powerwall 3 possible?
@judith The PW3 can accept AC or DC inputs. Regards, To...
By Toodles , 23 hours ago
-
RE: DESNZ doing a survey which asks the right questions!
Its great to hear of your approach and success with the...
By JamesPa , 1 day ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
The logic currently changes the max flow temp setting v...
By Grantmethestrength , 2 days ago
-
RE: Which thermostat should I get (or do I need one?)
OK. It may be best to run it through the wint...
By JamesPa , 2 days ago
-
RE: Samsung 5kW R32 Monobloc Gen 6 ASHP
Hi @Nick Owens, welcome to the forum. My Sam...
By Old_Scientist , 2 days ago
-
Heat pump and wifi kit connection.
Currently trying to connect my Samsung MIM-B19N board t...
By Alfapat , 2 days ago