Last seen: Aug 29, 2025
@derek-m - that all makes sense, and I think these two (ignore the NotImplementedError) in c3/message.py are indeed where the types given in the full ...
I can check that by looking at old logs (I have kept some) the header stays the same, always aa23c300000000000003, before and after changing from * 18...
I don't think I did, but can't remember for sure. But by the apparent logic of the code (we may of course be wrong about that), *25 should produce a b...
@derek-m - I don't think it has, recall I checked the actual message length after making the change from *18 to *25, and it stayed exactly the same (s...
More HA f*ckwittery this morning, database corrupted again, I was working on HA or rather midea_ac_lan at the time but only editing python files as I ...
Thinking about it, I have already done this (when I tested the individual bytes above 21 ages ago). The results were: data_offset + 22 = 0 (fixed, s...
@derek-m - thanks, will give the bytes 22 and 21 tests a try tomorrow. On a general note, I think it might be worth continuing this in a new thread,...
Well spotted, I missed that. Done, and HA restarted, but unfortunately still get 'outdoor_temperature': 0: 2023-03-14 18:49:17.061 DEBUG (Heat Pump ...
I am sure you are right, but that begs the question of why '*18' in the other code above. Perhaps it is something to do with our old friend zero based...
@derek-m - decided to go straight to 25 ('return bytearray([0x00] * 25)'), no change in message length (or content): Message immediately before chan...
Rant starts! This really is a brilliant example of how irritating python is, and proof of the claim that it is easy to learn is bullshit. By all n...
Latest Posts
-
RE: Does anyone have experience of a smart water meter?
@judith With Anglia Water it was a compulsory upgr...
By TechnoGeek , 48 minutes ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
We’re high energy users other than the ashp so the OVO ...
By Judith , 1 hour ago
-
RE: Octopus replacing the fixed 15p/kWh export rate with a market tracking one
I’ve looked harder now (beyond OE’s site) and it’s not ...
By Judith , 1 hour ago
-
RE: Electricity price predictions
As an investor in multiple listed renewable companies o...
By Old_Scientist , 3 hours ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
@temperature_gradient They'll all go to propane by 27. ...
By dgclimatecontrol , 5 hours ago
-
@cathoderay agreed, and I hope that the Renewable Heati...
By DREI , 6 hours ago
-
RE: Midea ASHP – how to set weather compensation
Something isn't right here, you don't design ufh to wor...
By JamesPa , 7 hours ago
-
RE: How Do I Know When the Hot Water Has Run Out?
@grahamf Personally I would consider bypassing one of t...
By JamesPa , 11 hours ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
No I'm not mining anything @drei but I am doing R&...
By Transparent , 11 hours ago
-
RE: Rodents! A word of warning for heat pump owners
Wasps caused frequent tripping of my lighting circuit a...
By JamesPa , 12 hours ago
-
RE: Ecodan & MelCloud scheduling
Yes, the 2 are separate. To add to the complex desig...
By HCas , 2 days ago
-
I should clarify that the FoxESS web interface is not l...
By Old_Scientist , 2 days ago
-
RE: Mitsu Wireless Controller and MelCloud
@robs Hi Rob, At the end of a note to Mitsu UK, thank...
By DavidAlgarve , 3 days ago
-
RE: Why so many sigenergi installer recommendations?
@adamk Tesla is a great option, it’s also one we instal...
By SAEnergy , 4 days ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
As a potential heat pump customer, it would be good to ...
By Temperature_Gradient , 4 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
The Ultimate Guide to Heat Pumps is less than a month a...
By Mars , 4 days ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 5 days ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 5 days ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 6 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 1 week ago
