Last seen: Jun 25, 2025
Heating circulating with 41.9 and 34.6 HP LINE 37.1C and 32.7 Emitters All pumps , two on HP AND O...
So , on the first two photos the Hp is delivering 43-5c and through to Rads its 37.4 2nd two photos its 36.6c to rads its 32 .8c remembering system ...
Attached earlier photos with HP and rads in circulation Black probes being HP Later without , when I came back to house all systems quiet
Yes I do, I have another set, I will place them shortly. Incedently I notice from the sAMSUNG CONTROLLER that the oat side temp outside is 0.6c and...
@jamespa Yes just a bit ! Only hot DHW of significance is a small bath once a day. There are only two of us . Thanks currently seeking info on Mod...
Thank you for your patience and explaining my questions. There is -so much I understand , but may be over thinking , it’s just that my first month wit...
Sorry I don’t understand the graph, and I don’t know how work out COP. What I can tell you are my Settings 2011 is -5c for Scotland 2012 is 15c amb...
Something not right yet , In the middlle days of Jan the average temperatures were 6c and 4c they are not that different now . In my quest to get the ...
Help required here , I have had two calls from Homely and I still cannot find out whether Mod Bus is compatible with Gen 5 Samsung Heat pump. Your ...
Yeah , interesting , looks like Honely is the nearest to solving my system, if it’s compatible with Gen 5 .
I will have a look , thank you . Hey , warm , but not happy yet, don’t worry , keep the thoughts ongoing! 😏
@jamespa Thanks for your interest again . I thought I was , were I was down to 41c flow but ultimately although the temp in more consistant the energy...
Latest Posts
-
RE: Heating coming on when not required
So you're saying that nothing is calling for heat becau...
By Mars , 16 minutes ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 1 hour ago
-
RE: Pressure drop Primary circuit
Just to update you all. I made up my own fill loop as...
By ohdearism , 2 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Hmm Before doing that I would want to be certain that...
By JamesPa , 7 hours ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 7 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 18 hours ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 1 day ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 1 day ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 3 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 3 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 4 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 5 days ago
