Notifications

Clear all

Replacing Worcester oil boiler with an ASHP

JulianC · 2021-03-30T18:15:26Z

I am replacing my 25/32 Worcester oil boiler with an ASHP Had discussions with many suppliers, a lot of whom wouldn't quote because we have 10mm pipe drops to each radiator, from 28mm loft pipes. Anyway: 201m2 bungalow. Built 2001. EPC rating of B after triple glazing, 300mm of loft insulation. We currently use between 1220-1500L of oil per annum. 100A incoming circuit. ASHP approved by DNO (Western Power). 20,500kWh of heating energy required. 3000kWh of hot water demand from the EPC. An energy loss calc and room by room heat demand has been undertaken. This has lead me to select Ecobubl from Winchester to undertake the work. They have proposed a Daikin Altherma 3H HT 18kW ASHP. Also a Mixergy 150L H/W tank - but we are also considering a standard cylinder with a large internal coil, to maximise the ASHP. And a 3kW immersion to use my 4kW of PV and Solic 200 electric diverter. Simple control system, using my current Nest. Had wondered about the Homely Energy control system, but I wonder if this adds complexity. Price is £13,700 for ASHP + Mixergy + buffer tank + installation and support for RHI. I should get back about £10k through RHI. I will take photos before, during and after installation which should be 12 April

Page 3 / 16 Prev Next

Air Source Heat Pumps (ASHPs)

Last Post by Cliff-Arnold 4 months ago

186 Posts

27 Users

182 Reactions

37.5 K Views

RSS

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3384

23/04/2021 9:57 pm

@julianc, I really, really like that black design of the heat pump. It looks really great. Excellent choice.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

👍

ReplyQuote

Kev M

(@kev-m)

Famed Member Member

Joined: 4 years ago

Posts: 1276

24/04/2021 1:18 pm

Yup it does look rather nice. Ours is a bit more like a fridge. 😀

ReplyQuote

JulianC

(@julianc)

Noble Member Member

Joined: 4 years ago

Posts: 322

Topic starter 24/04/2021 2:04 pm

Thank you I think it looks rather tidy.
Here are two more views:

From the side with all the electronics and compressor in it.
And a view showing the heat exchanger fins

Yes Martin Ecobubl has to come back to do a few minor fixes, including removing the Daikin transport straps 😊

Daikin Altherma 3H HT 12kWh ASHP with Mixergy h/w cylinder; 4kW solar PV with Solic 200 electric diverter; Honda e and new Hyundai Ioniq 5 N electric vehicles with Myenergi Zappi mk1 charger

👍

ReplyQuote

JulianC

(@julianc)

Noble Member Member

Joined: 4 years ago

Posts: 322

Topic starter 24/04/2021 2:11 pm

We are also, at the moment, moving two compost bins from in front of the ASHP. Give it more space to “breath”. The photo also shows the concrete base, where the 2500L oil tank was situated. We are thinking about putting a greenhouse on the base. But it will get an icy blast from the external unit. Difficult

Daikin Altherma 3H HT 12kWh ASHP with Mixergy h/w cylinder; 4kW solar PV with Solic 200 electric diverter; Honda e and new Hyundai Ioniq 5 N electric vehicles with Myenergi Zappi mk1 charger

👍

ReplyQuote

JulianC

(@julianc)

Noble Member Member

Joined: 4 years ago

Posts: 322

Topic starter 27/04/2021 7:38 pm

Now the space is all cleared, how do we use it? Will get the gate moved and a new fence added. Slab some of it

Daikin Altherma 3H HT 12kWh ASHP with Mixergy h/w cylinder; 4kW solar PV with Solic 200 electric diverter; Honda e and new Hyundai Ioniq 5 N electric vehicles with Myenergi Zappi mk1 charger

👍

ReplyQuote

JulianC

(@julianc)

Noble Member Member

Joined: 4 years ago

Posts: 322

Topic starter 27/04/2021 7:41 pm

Completed the RHI application. Very easy and straightforward. All agreed on line and first payment due 27/7/21. I will receive £357 quarterly or £10,017 over 7 years. Meaning the Daikin & Mixergy will have cost £3,730. Good value

Daikin Altherma 3H HT 12kWh ASHP with Mixergy h/w cylinder; 4kW solar PV with Solic 200 electric diverter; Honda e and new Hyundai Ioniq 5 N electric vehicles with Myenergi Zappi mk1 charger

👍

ReplyQuote

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3384

27/04/2021 9:00 pm

@julianc, that’s awesome. Now I’m super interested to hear about your performance, especially this winter.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

ReplyQuote

JulianC

(@julianc)

Noble Member Member

Joined: 4 years ago

Posts: 322

Topic starter 28/04/2021 4:47 pm

Me too Mars. That’s the big question. The heat demand / heat loss calculation calculation said 7500kWh. SCOP is 2.9

Time will tell 🤞

Daikin Altherma 3H HT 12kWh ASHP with Mixergy h/w cylinder; 4kW solar PV with Solic 200 electric diverter; Honda e and new Hyundai Ioniq 5 N electric vehicles with Myenergi Zappi mk1 charger

👍

ReplyQuote

Kev M

(@kev-m)

Famed Member Member

Joined: 4 years ago

Posts: 1276

29/04/2021 7:03 am

@julianc, I assume 7500 kWh is the annual demand from the ASHP for heat/HW. So the energy used is 21750kWh? Would you be happy with 7500 x your price per kWh for an annual bill? My corresponding numbers are 5400/17800, which fits with my slightly smaller house/ASHP. I'd be delighted with 5400 kWh/year.

I'm waiting to decide if I am going to get the MMSP before I apply for RHI. I'll update my installation thread with my month end numbers.

👍

ReplyQuote

Mars

(@editor)

Illustrious Member Admin

Joined: 5 years ago

Posts: 3384

29/04/2021 10:11 am

@julianc, time indeed will tell. If temperatures at night continue to remain cool, I'd recommend doing some small tweaks (if required) to prepare for the winter.

Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast

ReplyQuote

JulianC

(@julianc)

Noble Member Member

Joined: 4 years ago

Posts: 322

Topic starter 29/04/2021 11:34 am

Hi Kev, yes it’s the full demand for heat & h/w. I’m hoping the 7500kWh is a maximum, and the requirement will be less. Since the heat demand/loss calculations were set at a higher temperature than how we ran the oil boiler.
So I hope we can reduce the Daikin flow temperature. But that is all to test in the future.
Im not pursuing MMIS. It came up early on, when I was talking to EDF about a hybrid system - keeping the oil boiler and adding an 8kW Samsung ASHP. They used a control system, monthly cost of £14.99. You could claim the MMIS grant to pay for this. But that isn’t necessary for the Daikin solution. I have a very simple Nest controller, TRVs and the Mixergy tank takes care of itself.

Daikin Altherma 3H HT 12kWh ASHP with Mixergy h/w cylinder; 4kW solar PV with Solic 200 electric diverter; Honda e and new Hyundai Ioniq 5 N electric vehicles with Myenergi Zappi mk1 charger

ReplyQuote

JulianC

(@julianc)

Noble Member Member

Joined: 4 years ago

Posts: 322

Topic starter 29/04/2021 11:39 am

Just seen your note Mars - what tweaks would you suggest?

Ecobubl just departed, having sorted an issue with the Mixergy/Daikin not communicating.
I will be appearing on an Ecobubl YouTube video - will share here when it’s published 😊

Daikin Altherma 3H HT 12kWh ASHP with Mixergy h/w cylinder; 4kW solar PV with Solic 200 electric diverter; Honda e and new Hyundai Ioniq 5 N electric vehicles with Myenergi Zappi mk1 charger

ReplyQuote