@toodles it a better brand than the MCS had and if it is to be believed install are seeing a significant better SCOP than set by MCS. Also they have a better guarantee of fixing a problem than MCS do.
@nicholab My brother in law is having a heat geek install tomorrow, I will be able to give a first hand opinion after its done. One point in their favour was reducing the proposed size down from 16 kW (EDF proposal) down to 8kW 🤣
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
@nicholab From what I read of the MCS’s ability to guarantee fixing any problems, they have still not erupted their milk teeth! I am very grateful that our install has not required us to ask for their assistance in any way! I hope that forums such as this will in time, encourage the likes of MCS to pull their socks up! Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@bontwoody Just a minor tweak then!😉 (May we look forward to a detailed report in due course please?) Toodles
Toodles, he heats his home with cold draughts and cooks his food with magnets.
MCS and Heat Geek are not the same thing. MCS is a standard that any Heat Geek, or any other installer, has to abide by. It is not an installation standard, it just ensures the installer have ticked a married of irrelevant boxes and claiming lots of fees for the pleasure.Posted by: @nicholab@toodles it a better brand than the MCS had and if it is to be believed install are seeing a significant better SCOP than set by MCS. Also they have a better guarantee of fixing a problem than MCS do.
Heat Geek is effectively a club.
Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.
@heacol If I may enquire please: Where do the funds come from to finance the MCS? Would it be any chance be a combination of the installers and the Government/Tax Payers? Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@toodles Spot on, mostly from installers therefore end users, someone has to pay for it.
However, that is only a very small part of the cost. I ran MCS for over 12 years, the average cost of maintaining compliance over that time was in the region of £2500.00 per installation. On average, I installed between 50 and 100 units a year.
The reason MCS installations are so expensive. It is not the installers making the money.
Director at Heacol | Expert Heat Pump Consultant | Book a one-to-one consultation for pre- and post-installation advice, troubleshooting and system optimisation.
@toodles Happy to 🙂
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
@toodles @editor Spent a couple of days at my brother in law's and the WDS Green Energy installation was well organised and tidily done. I was a little surprised by a couple of the choices namely that
1. There were still using antifreeze rather than anti-freeze valves and water
2. The outside piping could have be made half the length if they had entered the garage sooner.
3. A buffer vessel was fitted but configured as a volumiser. When I queried why one was necessary they stated that the warranty would be invalid without it.
The fitters were all advocates of the technology having themselves had one fitted, the oldest guy had a Dimplex 20 years ago!
I will look forward to seeing how well it performs, Mars, did you want another review?
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.
2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.
@morgan There were doing it as I left, they hadnt quite got it up and running then.
House-2 bed partial stone bungalow, 5kW Samsung Gen 6 ASHP (Self install)
6.9 kWp of PV
5kWh DC coupled battery
Blog: https://thegreeningofrosecottage.weebly.com/
Heatpump Stats: http://heatpumpmonitor.org/system/view?id=60
@bontwoody A few minus points there possibly then but, please let us know how it progresses. On the matter of the pipe run, isn’t it normal to converse with the householders and plan the shortest practical route? Our installers certainly discussed the proposed pipe run first. Regards, Toodles
Toodles, he heats his home with cold draughts and cooks his food with magnets.
- 26 Forums
- 2,171 Topics
- 47.8 K Posts
- 28 Online
- 5,744 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Mitsu PAR-WT60R Wireless Controller - options
I have been running mine in auto adapt since 2019 and i...
By Abernyte , 39 minutes ago
-
RE: Powerwall 3 or Myenergi or something else?
Many of those tariffs are simple time of use tariffs, w...
By Temperature_Gradient , 11 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
Yes thats the whole point of the flexis as regards tran...
By JamesPa , 11 hours ago
-
So far as I can tell designing for DT5, which is 'the n...
By JamesPa , 11 hours ago
-
WC curve best discovered by experiment anyway as any lo...
By JamesPa , 18 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@editor your engineer's attitude is truly horrifying. ...
By GrahamF , 1 day ago
-
RE: How to choose Towel Rails for an ASHP
@rob-nezard yes absolutely. Here is the link and a pho...
By GrahamF , 2 days ago
-
@mixergy Thanks for the update, I would appreciate some...
By bontwoody , 2 days ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
Unfortunately I'm not that well connected 😂 ...
By Scalextrix , 2 days ago
-
RE: A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
It is interesting to see what our new Grant Aerona 290 ...
By GrahamF , 2 days ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
I've never physically seen it, but I seem to recall som...
By cathodeRay , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
I noticed that too and thought the same thing, but then...
By cathodeRay , 3 days ago
-
RE: Ya can’t win! It is S*d’s Law!
@old_scientist If IOF is still running next late spring...
By Toodles , 3 days ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 3 days ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 3 days ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 4 days ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 4 days ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 4 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 5 days ago