Solar PV production versus heat pump consumption
For those that have solar PV and heat pumps, let’s compare our heat pump consumption versus solar PV production. I know solar PV can’t fully offset heat pump consumption (unless you’ve got batteries) but it’ll be very interesting to see comparisons.
Please state your heat pump size and solar PV array size and where you are roughly in the UK. I’ll get the ball rolling with our October 2021 numbers:
18kW Caernarfon Global Energy Systems air source heat pump: 523kWh (11.32C average temperature)
6.16kW solar PV array (west midland, Welsh borders): 373kWh
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Posted by: @editorFor those that have solar PV and heat pumps, let’s compare our heat pump consumption versus solar PV production. I know solar PV can’t fully offset heat pump consumption (unless you’ve got batteries) but it’ll be very interesting to see comparisons.
Please state your heat pump size and solar PV array size and where you are roughly in the UK. I’ll get the ball rolling with our October 2021 numbers:
18kW Caernarfon Global Energy Systems air source heat pump: 523kWh (11.32C average temperature)
6.16kW solar PV array (west midland, Welsh borders): 373kWh
Hi Mars,
Whilst comparison data is always useful to have, I can see a slight problem with comparing just ASHP consumption with just solar PV generation. Some of the solar PV production will have been used within the home, so unless this can be quantified it would be difficult to assess how much solar PV was actually used to power your ASHP. There could be times when your solar PV system is providing more energy than required by your ASHP, so this excess may be used elsewhere. There will also be times when your ASHP is starting and stopping, so using all available excess solar PV energy when running, but then using very little of the excess when it is stopped. You could have a situation where your ASHP uses say 5kWh of energy in a 1 hour period, and your solar PV system generates 5kWh of excess energy over the same 1 hour period. But if your ASHP only ran for 30 minutes during that 1 hour period, then it will only have been able to utilise 2.5kWh of the available solar energy.
The other problem is that ASHP comparison does not work well with average ambient air temperature measurements, since the performance of ASHP's is greatly affected by changes in ambient air temperature, but not in a linear manner.
@derek-m, I know it's far from ideal, but if anyone wants to share their consumption of heat pumps and power generation from solar PV arrays, it'll still act as a metric for consumption and generation if nothing else.
Buy Bodge Buster – Homeowner Air Source Heat Pump Installation Guide: https://amzn.to/3NVndlU
From Zero to Heat Pump Hero: https://amzn.to/4bWkPFb
Subscribe and follow our Homeowners’ Q&A heat pump podcast
Posted by: @editor@derek-m, I know it's far from ideal, but if anyone wants to share their consumption of heat pumps and power generation from solar PV arrays, it'll still act as a metric for consumption and generation if nothing else.
Hi Mars,
I fully agree, it would be useful to see lots of data, good and bad, so that members can make a realistic assessment of how their particular system is performing. I'm afraid it is the Engineer in me, that was trained to make the end user aware of the limitations of any measurement taken or data collected.
- 22 Forums
- 2,096 Topics
- 46.2 K Posts
- 62 Online
- 3,384 Members
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
If you are thinking of heating on the immersion conside...
By JamesPa , 2 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 11 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 13 hours ago
-
RE: Mitsubishi cycling while on chilled water output
I absolutely wouldn't remove the buffer altogether, I'd...
By JamesPa , 20 hours ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 22 hours ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 2 days ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 2 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 3 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 3 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 4 days ago
-
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 5 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 5 days ago