Forums

Forums
Renewable Heating
Air Source Heat Pum...
Replacing knackered...
 
Notifications
Clear all

Replacing knackered oil boiler with ASHP - Perthshire

 
Page 2 / 2
Air Source Heat Pumps (ASHPs)
Last Post by DowallyDrifter 4 months ago
14 Posts
5 Users
0 Reactions
796 Views
RSS
 JamesPa
(@jamespa)
Illustrious Member Moderator
Joined: 2 years ago
Posts: 2621
13/03/2025 9:38 pm  

On the basis that 1l oil = 10kWh and 1cu m wood = 2500kWh, the total is between 25+10=35 and 40+10=50 MWh per annum.  That's definitely in the same general ball park (dividing by 2000-2900 depending on which calculation you prefer) so I would say that the heat loss calculations are at least plausible.  So basically I'm with @bontwoody

Id be tempted to consider something like a 16kW heat pump (or the largest reasonable one you can find, avoiding anything too extreme) with some backup heating for the coldest days if it turns out you need it!  Or an 8 and a 10 kW or similar running either alone or together.

This post was modified 4 months ago by JamesPa

4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.


   
ReplyQuote
 DowallyDrifter
(@dowallydrifter)
Active Member Member
Joined: 4 months ago
Posts: 10
Topic starter 14/03/2025 8:38 am  

@abernyte thanks tbh I was more thinking about bolstering the insulation within the timber frame which would entail removal of plasterboard etc.  and a massive amount of disruption.


   
ReplyQuote
Page 2 / 2
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

RHH Awards

👉 Vote for “Heat Pump of the Year”

👉 Vote for “Best Manufacturer Customer Support”

👉 Nominate “Heat Pump Installation of Year”, “Best New Tech or Innovation” or “Turkey of the Year” here!

Latest Posts

Members Online

 No online members at the moment