Maintaining thermal mass vs starting heating later in season?
Has anyone considered the difference strategies between these:
1. Start heating soon, so as to maintain the temperature of the thick stone walls, etc we have, so we are only trickling heat into the building. However it would mean starting the heating maybe 2-4 weeks earlier in the season
2. Keeping the heating off, then having a few days where the HP has to work quite hard to bring the building back up to temperature. Trying to heat a room with cold stone walls is hard. But it means keeping the heating off for longer
To give context our building is old, and while insulated, there's still a lot of exposed stonework (until our retrofit is complete).
Outside temp here is about 16c now, 12-13c overnight. The house is maintaining about 19-20c with windows open, no heating. So the stone is doing it's work!
250sqm house. 30kWh Sunsynk/Pylontech battery system. 14kWp solar. Ecodan 14kW. BMW iX.
I suppose internal brickwork or brickwork that is insulated on the outside will stay approximately at your internal temp throughout winter. Uninsulated brickwork will settle into being 20C on the inside and coldish on the outside over time.Â
Â
As I see it, adding heat before the inside gets below your set point won't give any benefit. If it were me I would turn on the heating as soon as the internal temp drops below the set point, but not before. 🙂
- 26 Forums
- 2,102 Topics
- 46.2 K Posts
- 111 Online
- 3,388 Members
Join Us!
Latest Posts
-
RE: Ecodan consuming 100kwh per day in new build!!!
PS to above. I just looked again at the photo you post...
By JamesPa , 4 minutes ago
-
RE: Plug and play solar. Thoughts?
And we have it: DESNZ are now investigating the feasi...
By Lucia , 2 hours ago
-
RE: Compressor attempts start but fails - Nibe Fighter 2005 8kW
@skyefarmer great you located the source of the issue a...
By Mars , 5 hours ago
-
RE: Location of hot water isolation valve on cylinder
@rossowheels if you isolate the water supply in it will...
By ASHP-BOBBA , 14 hours ago
-
The Importance of Radiator Balancing for Efficient Heating: Introducing the Flow Regulating Valve
It’s fascinating to watch how low-temperature heating i...
By Mars , 23 hours ago
-
@heacol, if you're around, can you please provide some ...
By Mars , 1 day ago
-
RE: Servicing Hitachi HP in rural Somerset
I'd give GreenGenUK a call or email them: sales@greenge...
By Mars , 1 day ago
-
RE: Heating coming on when not required
I played with a max heating temp but there is a world o...
By JamesPa , 2 days ago
-
RE: Pressure drop Primary circuit
I've always regarded topping up heating systems as my j...
By JamesPa , 2 days ago
-
RE: Heat pump solutions and/or installer recommendations for France
I’d travel to France for work if you were struggling wi...
By Damon Blakemore , 2 days ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 2 days ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 3 days ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 3 days ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 3 days ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 4 days ago