Is my Heatmiser UFH controller dying?
I've got a Heatmiser UH8-RF controlling my underfloor heating. I've never liked it, the room stats are inaccurate and cheap & nasty (old ones, not the sexy Neo ones) and every so often the system seems to get confused. Yesterday it stopped controlling the valves, although the stats were still clicking the relays nothing was happening. The actuators are 230v, when I measured the valves that were open it was reading 280v. The incoming supply is ok (although there may have been a brief outage) but surely I shouldn't be seeing 280v? Can anybody who has one of these verify this?
I'd love to replace it with something that integrated properly with my Vaillant ASHP, but there doesn't seem to be anything else on the market. Any suggestions?
- 26 Forums
- 2,233 Topics
- 49.7 K Posts
- 171 Online
- 5,898 Members
Join Us!
Podcast Picks
Latest Posts
-
@jamespa absolutely. But I think I might have to get th...
By bontwoody , 12 minutes ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
As you know balancing flow rates is very important. If...
By JamesPa , 28 minutes ago
-
This is what I do, but I have a very simple economy 7 l...
By JamesPa , 37 minutes ago
-
RE: Master & Slave Zones/Setback
Re outdoor probes can be added from the ones attached t...
By bretix , 1 hour ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
Thanks for sharing this, it is clearly disappointing, B...
By Batpred , 9 hours ago
-
RE: My experience with 3 heat pump surveys: Heat Geek, British Gas & Octopus
Firstly I agree with @grahamf above, very sensible comm...
By JamesPa , 10 hours ago
-
RE: PV Panels on roof in Conservation Area
Update: .... Council said, "Yes", to installing PV &am...
By colinc , 13 hours ago
-
RE: Effect of Mitsu PAR WT60 Wireless Controller
@sunandair We were not present to do a tidy changeover ...
By DavidAlgarve , 17 hours ago
-
I’m frankly amazed you think anything I have posted on ...
By Majordennisbloodnok , 19 hours ago
-
RE: Replacing knackered oil boiler with Samsung ASHP - Perthshire
Thanks for your full reply @mike-h. It certainly cleare...
By DowallyDrifter , 22 hours ago
-
RE: Daikin Octopus installation update - I saw my first defrost. 😍😂
I don't seem to have a mixer valve. Just pressure regul...
By Jancold , 23 hours ago
-
RE: New Fogstar 15.5kWh upright solution
😁Yes, the 90Amps capacity in total in an 8k inv...
By Batpred , 23 hours ago
-
RE: Question about Heating Pump Operation mode – Ecodan FTC6 v20.06
Thanks, I have à split model so there is no water circu...
By Johj45 , 2 days ago
-
RE: Say hello and introduce yourself
This discussion has gone quite deep for our Hello &...
By Transparent , 2 days ago
-
RE: Midea ASHP – how to set weather compensation
@pash44pump - it sounds as though you are close to havi...
By cathodeRay , 2 days ago
-
Let's see if we can tempt @glyn-h to give his insights....
By Mars , 2 days ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
Let's first note what those parameters are. They are ...
By Transparent , 2 days ago
-
I’ve met the Flexi-Orb team, and they come across as ge...
By Mars , 2 days ago
-
Webinar on "Heat Pumps for Home Owners" Thursday 20...
By Mars , 2 days ago