Heating Turned Off but Radiators Still Warm
Can anyone shed any light on why our Daikin Altherma 3 Monobloc (R32) should still be keeping the radiators warm and the hot water above target temperature, when everything is switched off?
While we have builders working on our house and some of the windows are replaced by boards, I want to maintain it at a safe level to avoid freezing, but no more.
The heating is set for constant a water temperature (not weather dependant) of 35C and the thermostat set to 5C. However, when there was nobody there yesterday, my temperature loggers show that the house was kept between 12.5C and 13.9C. The DWH is set to 30C, but has been maintained at 36C.
Our installers tell me that the system is still running to protect it from the current cold weather. However, even when the outside temperature was at least 5C, the compressor was drawing an average of 1.142 kwh.
This morning, the forecast said that the weather would not freeze, so I turned off both the heating and DWH. However, the compressor has been running most of the day and the radiators are still warm.
When we are living in the house, this behaviour would not matter, but I am keen to understand what is going on, in case it reveals a fundamental fault in the system. I would also like to stop paying to heat the garden!
Does this match the behaviour you would expect in colder weather? Would the cold weather system protection require the house to remain warm?
Â
-
Avoid the Heat Pump Villain: Why Low-Loss Headers and Buffers Can Sabotage Your Heat Pump's Efficiency
2 months ago
-
How can we prevent our LG heat pump from freezing up in cold weather?
4 months ago
-
Ideal Logic 10kW Heat Pump Pipes Noisy and Very Expensive to Run
5 months ago
-
Samsung 5kW R32 Monobloc Gen 6 ASHP
5 months ago
-
L9 error with Mitsubishi ecodan heat pump
6 months ago
- 22 Forums
- 2,097 Topics
- 46.2 K Posts
- 53 Online
- 3,385 Members
Join Us!
Latest Posts
-
RE: Ecodan consuming 100kwh per day in new build!!!
Hmm Before doing that I would want to be certain that...
By JamesPa , 4 hours ago
-
RE: 5 Star Service from Havenwise
That's always a danger with any new good idea, @morgan....
By Majordennisbloodnok , 4 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
Sorry Bravo. I have no installer contacts outside the U...
By Mars , 15 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 15 hours ago
-
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 23 hours ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 1 day ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 3 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 3 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 4 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 5 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 5 days ago