Heat distribution in the home
I read that best practice for domestic heat pumps is to operate a 'slow and steady' regime, running 24/7 and with no TRVs. Heat delivery to different rooms in the property being balanced by careful adjustment of UFH valves and radiator lockshield valves. I can imagine that the difficulty in optimisation will depend on the extent of room compartmentalisation, as opposed to an open-plan living arrangement. I am concerned by the potential effects that I would be likely to experience with my kitchen/diner and lounge, both of which have large expanses of glass on the east-facing walls. When the sun appears they warm up very quickly. Perhaps Air to Air heat pumps would offer a better solution (although my wife would be sensitive to any fan noise).
Solar gain is definitely a control issue irrespective of the heat source. I have a south facing patio window in the room we spend most time in, and it does overheat a bit whatever I do when the sun comes out in winter.
The accepted solution with an ASHP seems to be to fit TRVs set a degree or two above the desired temperature, so they act as temperature limiters not temperature controllers. This shouldn't adversely affect COP because, when they do kick in, all rooms are still being heated by one means or another, so you are not suffering the problem that a small emitter area is being used to heat a larger area of the house than it was designed for (which means you have to increase flow temperature to compensate - the mechanism by which COP is reduced if you only heat part of the house).
4kW peak of solar PV since 2011; EV and a 1930s house which has been partially renovated to improve its efficiency. 7kW Vaillant heat pump.
- 22 Forums
- 2,097 Topics
- 46.2 K Posts
- 43 Online
- 3,385 Members
Latest Posts
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 2 hours ago
-
RE: Mitsubishi cycling while on chilled water output
@downfield I think the cooling capacity ratings for you...
By IaAck , 4 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
No idea, but Google-Fu leads me to Bon chan...
By Scalextrix , 19 hours ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 2 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 2 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 3 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 4 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 4 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 5 days ago
-
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 6 days ago