Grant 10kW versus Samsung 12kW - sizing dilemma with ECO4 installation
Balancing all the advice here we decided on the Grant 10Kw over the Samsung 16kw.
The installation was at the start of March. We were very impressed. A team from the Valleys hit the house like a (well-oiled) train and it was all done in two days, they took on board some requests (e.g. about fixings) and really knew what they were doing. We’ve had a few trades in the house since, including a plumber, who have praised the configuration and pipework. Given that this was grant funded and so we had no control over that side of things I feel we’ve been very fortunate.
The system has performed fine so far but obviously we haven’t been in the winter months. I’ll try to remember to give another update come December. The one issue has been the new Grant smart controller – there were significant teething problems. The installers, and Grant engineers, were learning the product themselves on the job, but on the plus side that has meant that we’ve had their attention, and so far the customer service has been very good. It’s working fine now, but again, we’ll see how it goes through its first winter.
- 22 Forums
- 2,097 Topics
- 46.2 K Posts
- 42 Online
- 3,385 Members
Join Us!
Latest Posts
-
RE: Heat pump solutions and/or installer recommendations for France
Sorry Bravo. I have no installer contacts outside the U...
By Mars , 8 hours ago
-
Have your say in the Renewable Heating Hub Awards
It’s time to celebrate the best (and call out the worst...
By Mars , 8 hours ago
-
RE: Ecodan consuming 100kwh per day in new build!!!
Hey all, I just wanted to put in an update and a...
By anca1808 , 9 hours ago
-
-
RE: 5 Star Service from Havenwise
Our interview with Henri from Havenwise it out:
By Mars , 15 hours ago
-
RE: Mitsubishi cycling while on chilled water output
@iaack yes there's no denying that cold air sinks! I s...
By downfield , 16 hours ago
-
RE: Weather compensated secondary circuits with Biomass
@andycoo that flooring sounds ideal. Extra volume is ...
By Sune , 19 hours ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 2 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 2 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 3 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 4 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 5 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 5 days ago