Forums

Forums
Renewable Heating
Air Source Heat Pum...
FTC cables broken -...
 
Notifications
Clear all

FTC cables broken - Can I use heat pump without? Ecodan Heat pump

 
Air Source Heat Pumps (ASHPs)
Last Post by Derek M 2 years ago
2 Posts
2 Users
0 Reactions
1,035 Views
RSS
 jonbonbaby
(@jonbonbaby)
New Member Member
Joined: 2 years ago
Posts: 1
Topic starter 30/12/2023 11:09 pm  

Hi this may be a stupid question , but my dog somehow managed to tear 2 cables that new attached to the FTC on the circuit board it is marked - RD - CNW12, to is coming up with error code L5 and the heat pump doesn't seem to be kicking in  

 

Any ideas if I can do a workaround or a way to fix ?


   
Quote
 Derek M
(@derek-m)
Illustrious Member Member
Joined: 4 years ago
Posts: 4427
31/12/2023 12:46 am  

Posted by: @jonbonbaby
↑

Hi this may be a stupid question , but my dog somehow managed to tear 2 cables that new attached to the FTC on the circuit board it is marked - RD - CNW12, to is coming up with error code L5 and the heat pump doesn't seem to be kicking in  

 

Any ideas if I can do a workaround or a way to fix ?

The cable should be connected to THW1 - Flow Water Temperature Thermistor and THW2 - Return Water Temperature Thermistor.

To get your system operational I would suggest that you try to reconnect the four cores. Remove the plug from the circuit board and if you have a soldering iron then solder the broken wires together, or tape them if you don't have a soldering iron. The wires should be colour coded. When repaired replace the plug back in the socket.

You may be able to get replacement Thermistors later.

I doubt that the heat pump will function without these two signals since they are rather important for correct operation.

 


   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  



Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →