Recent Posts

| Forums | Topics

Page 93 / 167 Prev Next

Posts with their shortened content
	RE: Incorrect Billing of Customers with a Smart Meter By KoRWraith, 2 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	A long time has passed and after a short lived flirtation with Tomato Energy I've now landed on So Energy for my EV/battery tariff. There's some chat on Facebook regarding So Energy's exact off peak h...
	Designing my house system with a mix of air to air and air to water By pipebaron, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi Guys, I hope you're all good. I recently got a survey and vent test done on my property that shows my heat loss to be aruond 6.4kw. It's a three bedroom house with a converted garage as the...
	RE: Mixergy Tank Failure By bontwoody, 2 weeks ago Forum Domestic Hot Water & Cylinders
	@jamespa absolutely. But I think I might have to get the Mixergy Control unit to achieve that. Ill keep my eyes open on ebay. In the mean time I will also drop the desired tank temperature and maybe h...
	RE: Mixergy Tank Failure By JamesPa, 2 weeks ago Forum Domestic Hot Water & Cylinders
	If you can turn on the destrat pump COP should improve because the water in contact with the coil will be colder. You will also heat more of the tank likely to a higher temp.
	RE: Grant 13kW Aerona3 - issues getting zones to temp By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	As you know balancing flow rates is very important. If flow from heat pump < flow to emitters you get significant system distortion (and thus loss of efficiency) because return water finds its way...
	RE: Mixergy Tank Failure By bontwoody, 2 weeks ago Forum Domestic Hot Water & Cylinders
	@old_scientist Yip Yip! it worked. Attachment : image.png Attachment : Screenshot_20251023_081605_Mixergy.jpg So the DT was small, probably because the stratification pump is off and the...
	RE: Buying a new EV charger By JamesPa, 2 weeks ago Forum Safety, Regulations, Tools, Plumbing & DIY Installations
	This is what I do, but I have a very simple economy 7 like tarrif (EON Next Drive) so the settings are trivial. EV-rated 13A wall socket, 'granny' charger, Shelley 16A relay, HA. The Shelley relay c...
	RE: Master & Slave Zones/Setback By bretix, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Re outdoor probes can be added from the ones attached to the units already or at least extended to a recommended north facing position
	RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh? By Batpred, 2 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	Thanks for sharing this, it is clearly disappointing, BYD is exactly what I thought would be ideal... But better for Octopus to pull out than to sell you something that you would be unknowingly beta-t...
	RE: Buying a new EV charger By Batpred, 2 weeks ago Forum Safety, Regulations, Tools, Plumbing & DIY Installations
	Thanks for sharing. 🙂 To be honest, right now I have a much better sense of what matters. I believe that I have things ready in my HA to be able to drive any dumb socket (or a wifi ena...
	RE: Grant 13kW Aerona3 - issues getting zones to temp By Crimson, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Just to be clear this won’t be a Grant LLH/combo volumiser. This will be a 4 port 80L max buffer/LLH. Due to space limitations. They've made no mention of flow setters etc.way back in this thread ther...
	RE: Master & Slave Zones/Setback By JamesPa, 2 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Many, perhaps most, heat pumps run their water pumps occasionally (sometimes every 24 hrs or once per week) to prevent this. With it being such a mild day and with sun your consumption shoul...