Recent Posts

| Forums | Topics

Page 100 / 164 Prev Next

Posts with their shortened content
	RE: Getting ready for export By Batpred, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	"KISS" applies. As the principle of "when in Rome, do it like the Romans do it". 😀 I had an EV charger put in by a qualified electrician. Did he register it with DNO? Of course not, apart from...
	Master & Slave Zones/Setback By bretix, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	As mentioned in other forums when 2 x 10kw grant aerona are set up with 2 controllers my system only ever seems to run from 1 pump (hp2) set up for hot water and heat only. Hp1 is set for heat only bu...
	RE: Effect of Mitsu PAR WT60 Wireless Controller By RobS, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Hi David, If your Mitsi is still on weather compensation then the WT60 should act as an internal temperature limiter. The temperature it's set to is the switch on temp and the set temp + 1C is the sw...
	RE: Getting ready for export By Transparent, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	In most cases I'd expect such liability would be tested under civil law. But the boundaries of criminal liability aren't particularly clear when it comes to DIY stuff we do around the home. Very few h...
	RE: Question about Heating Pump Operation mode – Ecodan FTC6 v20.06 By Johj45, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	Thanks, I have à split model so there is no water circulating to and from the outdoor unit. Only between the cylinder and the buffer tank, and the from buffer to radiators. the Buffer is a 4 pipe mode...
	RE: Getting ready for export By Majordennisbloodnok, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	Indeed, @transparent I understand it goes further, too. If someone unqualified carried out some notifiable work, that could render them liable for any damage or injury it caused. I’m not an expert, t...
	RE: Say hello and introduce yourself By Transparent, 3 weeks ago Forum Introductions, Forum Rules & Updates
	This discussion has gone quite deep for our Hello & Welcome topic. If you're new here, and still wondering whether to introduce yourself, then please do so. There aren't that many problems we have...
	RE: Getting ready for export By Transparent, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	... or when you attempt make a claim on insurance !
	RE: Getting ready for export By Majordennisbloodnok, 3 weeks ago Forum Electricity, Tariffs, Monitoring & Providers
	You are very mistaken, @batpred. KISS does not apply; legislation does. That’s irrespective of the “no solar” context you talk about. That also means the use of a qualified electrician to eithe carry ...
	RE: Midea ASHP – how to set weather compensation By cathodeRay, 3 weeks ago Forum Air Source Heat Pumps (ASHPs)
	@pash44pump - it sounds as though you are close to having some useful data. I avoid things like JupyterLab, they just seem to add another layer of complication. My python scripts are simple scripts t...