Octopus tariffs - API & choosing best tariff
one of the reasons its harder for me to take full advantage of periods of lower time of use tariffs is that my Givenergy Gen1 inverter can only charge/discharge from batteries at 2.6kwh. Gen2 and the new All in One offer much better options. My ASHP is a large one ... so again needs bigger throughput to take full advantage. its not worth upgrading as the system works fine and Tracker import with Fixed export is giving a very fair cost.
Overall very happy with the setup - installed 2021 .... before battery & material prices took off.
Listed Grade 2 building with large modern extension.
LG Therma V 16kw ASHP
Underfloor heating + Rads
8kw pv solar
3 x 8.2kw GivEnergy batteries
1 x GivEnergy Gen1 hybrid 5.0kw inverter
Manual changeover EPS
MG4 EV
@tim441 I see that tomorrow (Sunday 30th. July) Octopus Agile has a peppering of very cheap and some negative priced periods available. Guess who has just set up their Eddi to charge the DHW and also set the Tesla app to some negatively charged half hours to fill the battery?! Regards, Toodles
Toodles, he heats his home with cold draughts and cooks his food with magnets.
@toodles yes...very nice! presumably wind is blowing nicely ..
Tracker is down at 12.06p as all day rate so I'm not unhappy with that. My Gen1 Givenergy inverter can only charge batteries at 2.6kwh.
Charging batteries as well as EV ... and heating hot tub!
Key question will be what happens over the winter - I'm hopeful that barring black swans out of Russia/Ukraine/China etc we will see overall wholesale prices well under standard rates
Listed Grade 2 building with large modern extension.
LG Therma V 16kw ASHP
Underfloor heating + Rads
8kw pv solar
3 x 8.2kw GivEnergy batteries
1 x GivEnergy Gen1 hybrid 5.0kw inverter
Manual changeover EPS
MG4 EV
@tim441 No hot tub here or EV for that matter but, tomorrow’s laundry is running a day earlier and the oven is now on a an autoclean cycle! The battery is charging nicely and DHW is up to temperature. I have never been a gambler - that is until Agile came along.;-))) Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
I think I was ‘spoilt’ yesterday/today as tomorrow’s half hourly slots are rather more expensive! I have instructed Eddi not to ‘spend’ more than 10 pence per kW/h to heat the water tomorrow! Ah well, you win some…. (Of course this is still very a good rate by today’s reckoning, but Ill leave any PV output to export where it can as this still rewards me at 15p per kW/h.!) Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Again, tomorrow (Aug. 3rd.) there are some very cheap half hour slots to avail oneself of for heating water / charging battery type purposes; my DHW will cost less than 10 pence for a day’s supply 😉 Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
Having heard about Octopus Energy introducing ‘Power Ups’ in a trial area at present, I yhought others might like to know more here: https://octopus.energy/press/free-whizz-octopus-launches-power-ups-free-energy-when-the-sun-shines-and-the-wind-blows/
Regards, Toodles.
Toodles, he heats his home with cold draughts and cooks his food with magnets.
-
Who's your electricity provider and what's your tariff?
48 minutes ago
-
Agile: average import cost vs other tariffs?
3 months ago
-
Switching tariff in Winter? or stick year round?
11 months ago
-
Confusion over Octopus Tariffs
1 year ago
-
Octopus export - standard fixed tariff is 15p
2 years ago
- 26 Forums
- 2,129 Topics
- 46.8 K Posts
- 23 Online
- 5,654 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Who has a V2G EV installation
General comment on battery care... I guess if ev is on ...
By Tim441 , 11 minutes ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@old_scientist I have never cleaned the mag filter myse...
By Toodles , 22 minutes ago
-
@old_scientist like for like comparisons are almost imp...
By Tim441 , 25 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@old_scientist There is an option in the Tesla app that...
By Toodles , 48 minutes ago
-
RE: Mitsu Wireless Controller and MelCloud
On the FTC5 I think this requires the dip switch on the...
By Abernyte , 58 minutes ago
-
RE: ASHP heat output monitoring
@carlo I have a 16kw LG Therma V. Installed 2020 so eve...
By Tim441 , 4 hours ago
-
RE: Octopus Cosy & Octopus EV + bidirectional smart tariff, together. What, eh?
@old_scientist me too. Just installed my new heat pump ...
By Eliuccio , 2 days ago
-
RE: Is your heat pump insured?
Yup just spoke to Privilege to inform them of my impend...
By Scalextrix , 2 days ago
-
RE: Forum updates, announcements & issues
Just to keep everyone in the loop, as the site continue...
By Mars , 2 days ago
-
RE: Fast DHW setting on Midea (Clivet) heat pump
@simon-w, is this something you could potentially assis...
By Mars , 3 days ago
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Fwiw I called my installer out for the first time a few...
By JamesPa , 3 days ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
@sandy, I'll send Vaillant an email tomorrow and see if...
By Mars , 3 days ago
-
RE: Long term efficiency degradation
@jamespa yes as I thought thanks. We have a reaso...
By Scalextrix , 3 days ago
-
RE: Sunamp Thermino Heat Battery
@jamespa A few days after the installation had been com...
By Toodles , 4 days ago
-
RE: Planning Permission May 2025
Fair enough. I have read the legislation and MCS020a ...
By JamesPa , 6 days ago
-
RE: How do I choose a single room MVHR to prevent losing heat in my bathroom ?
An update on the Heatsava. It is the most difficult thi...
By heat-pump-newbie , 6 days ago
-
RE: Renewables & Heat Pumps in the News
this document extensively describes (in a non-blame, ne...
By Judith , 1 week ago
-
RE: Ecodan - Legionella Operation Time and Target Temperature
Once the white plastic cap is removed, my immersion loo...
By Old_Scientist , 1 week ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@dgclimatecontrol I don't know, but they were not happy...
By DavidAlgarve , 1 week ago
-
RE: Why do we need pressurised systems?
A good question @toodles. My old open thermal store and...
By AllyFish , 1 week ago