Last seen: Oct 22, 2024
Balancing all the advice here we decided on the Grant 10Kw over the Samsung 16kw. The installation was at the start of March. We were very impressed...
@rupes, thanks for your message above. Just to be clear, if I can get these two functions wired up at installation it'll mean I'll have the option of ...
It sounds like we don't need to lay concrete then, but some sort of soakaway is a priority. Thanks.
Thanks @allyfish, I’ll certainly request the new Grant smart controller. How would this interface with the Homely system recommended by @iancalderbank...
[/quote] both units are supported by a 3rd party control system called Homely , custom developed in the UK for heat pumps, which seems to be a good w...
One other question on a detail please: the heat pump is going to go on a brick-paved sort of patio area, which is pretty flat though with some slight ...
Hello again @iancalderbank, @editor, @allyfish, @peterrsaltings, @mikefl and @hughf. After all the help from people here this is to say that our decis...
@mikefl thanks a lot for these thoughts; if you don't mind I'd be interested to know what sort of house you have (approx size and type and insulation...
Thank you everyone for your comments, which I'm busy digesting. On this, thanks @peterrsaltings. I have to admit, I am still confused on this poi...
ok, @allyfish, @iancalderbank,and @editor, as you’ve advocated, I've finally managed to produce a heat loss calculation, using the Freedom Heat Pump s...
Thanks so much for your long and considered post yesterday Peter - for some reason I've only just seen it, and am working my way through what you say,...
@iancalderbank, on this point about the 1C swing between on and off with the Samsung I was wanting to check whether this has any bearing on operating ...
- 26 Forums
- 2,335 Topics
- 52.6 K Posts
- 155 Online
- 5,990 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Help me keep the faith with my air source heat pump installation
If you are looking for help getting started on HA, ther...
By Batpred , 3 hours ago
-
This Solis inverter being rated 8kw and (I expect, as I...
By Batpred , 4 hours ago
-
RE: Replacing my 18 month old Hitachi Yutaki ASHP
It will be good then to see some plots tomorrow morning...
By JamesPa , 5 hours ago
-
RE: A2A vs A2W: Which Heat Pump Would You Pick?
I have one fancoil in an otherwise all radiator system....
By JamesPa , 5 hours ago
-
RE: Is your heat pump insured?
@davesoa Just following up on my original post, I am go...
By Richard24738 , 5 hours ago
-
RE: How good is the app support for your heat pump?
I would describe the Vaillant app as pretty reasonable-...
By JamesPa , 6 hours ago
-
RE: Electricity price predictions
That's understandable...but I was referring to our 'oth...
By Transparent , 8 hours ago
-
@batpred Inwas looking at the Ånderson Wall Box, found ...
By AgentGeorge , 8 hours ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
I'll be interested to see how you get on. Are ...
By Bash , 9 hours ago
-
RE: Battery with existing PV - regulations
We submitted our papers for SEG, so hopefully we will s...
By Batpred , 9 hours ago
-
RE: One Year Review: Grant 13kW ASHP - A Catalogue of Errors
@solenoid Its probably worth adding that, done well, g...
By JamesPa , 12 hours ago
-
RE: Solar panels on side of house to heat water
My solar panels (both PV and thermal) have not required...
By Transparent , 14 hours ago
-
RE: Rate the quality of your heat pump design and installation
@solenoid Welcome. I have made some commen...
By JamesPa , 18 hours ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@f1p Thanks for the info, good to know
By ThunderMink , 19 hours ago
-
@toodles I will do, it can’t go any worse than my last ...
By Grantmethestrength , 1 day ago
-
RE: Configuring third party dongle for Ecodan local control
Yes, it is certainly an advanced feature and quite diff...
By F1p , 1 day ago
-
RE: MELcloud scheduling misbehaviour
@richard24738 We also want hot water for 7:00am showers...
By DavidAlgarve , 1 day ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@hcas Thanks Henri. I take your point, but feel that wh...
By DavidAlgarve , 2 days ago


