Last seen: Jan 8, 2025
No buffer or low loss header. Two additional pumps. The Ecodan sensors would be a 300mm to the right of the heat meter on the same pipe run on th...
that's what we do.
I've just had a look. The MMSP heat meter is showing 37C flow, 33C return. I think the flow is correct; it corresponds to my reading from the inlet t...
Derek, from what I can see the meter is receiving and recording data; flow rate, flow and return temps and kWh. Just not the right data and the tem...
Derek, the Ecodan controller increments once every 24 hrs and stores month and year to date, so you can't see it working in real time. Melcloud i...
Well the COP is now showing about 6.5, which I still don't believe.
@philip-here. Philip, Welcome fromme. You probably know this but RHI is likely to be a lot more than £5k, although you do pay up front. Most peo...
I'm not sure if this has been posted but it's quite a good analysis of heat pump performance, if you like this sort of thing.
No, still not working. ☹ The energy meter manual is very specific about these sensors and how they are positioned. The FTC6 manual says where t...
@derek-m, Derek, I've had another fiddle round with the MMSP sensor; I've found a suitable copper pipe to attach it to. It seems to be recording ...
I noticed that too; in fact it can produce more than 14kW under some conditions. Having said that, 14kW at a COP of 1.75 is 8kW - I wouldn't want to ...
@derek-m , Derek, thanks, I'll have look at that. Kev
Latest Posts
-
RE: Why so many sigenergi installer recommendations?
@adamk Tesla is a great option, it’s also one we instal...
By SAEnergy , 1 hour ago
-
RE: Rodents! A word of warning for heat pump owners
Hradline in Telegraph: Brace for plague of rats after s...
By Tim441 , 5 hours ago
-
What crazy nonsense are inverter limits and why are they imposed?
I’ve recently found out a DNO can impose an inverter li...
By AdamK , 7 hours ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
As a potential heat pump customer, it would be good to ...
By Temperature_Gradient , 8 hours ago
-
A Customer's Lessons Learnt from a Heat Pump Installation in a Large House
I felt it would be helpful to share some lessons about ...
By GrahamF , 9 hours ago
-
RE: Mitsu Wireless Controller and MelCloud
Hi David We have an FTC7 but the settings seem to be ...
By RobS , 14 hours ago
-
RE: Octopus replacing the fixed 15p/kWh export rate with a market tracking one
@trbob I have just extracted the details for Agile Expo...
By Toodles , 15 hours ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
The Ultimate Guide to Heat Pumps is less than a month a...
By Mars , 16 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
@editor Hi Mars, We have just installed a Grant Aerona...
By GrahamF , 1 day ago
-
RE: Sanity check please. Battery storage and inverter sizing.
There are MCS guidelines about how close to the edge/ri...
By Old_Scientist , 2 days ago
-
RE: Balancing financial efficiency and comfort using the Octopus Cosy tariff
I estimated our usage on the following basis. The mos...
By Old_Scientist , 2 days ago
-
@editor Something changed in this last 12 months, they ...
By ASHP-BOBBA , 3 days ago
-
RE: Ecodan & MelCloud scheduling
I put the above question to Mitsu UK at the sme time as...
By DavidAlgarve , 3 days ago
-
Thanks for the heat geek info. I've fitted my own heat ...
By bontwoody , 4 days ago
-
RE: Does anyone have experience of a smart water meter?
Just to give a sense of scale, I've used the CCW water ...
By Majordennisbloodnok , 4 days ago
-
RE: Powerwall 3 or Myenergi or something else?
We have a Tesla Powerwall 3, recently installed, so I m...
By Old_Scientist , 5 days ago
-
RE: Mitsubishi PAR-WT60R-E Wireless Controller installation
@morgan They have been paired once but it was thought b...
By DavidAlgarve , 6 days ago
-
RE: Isolating the system for a planned power cut
A great many ground-mounted local substation transforme...
By Transparent , 6 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
Having bit the bullet and paid £250 for a service, our ...
By Old_Scientist , 7 days ago
-
New heat pump heating system underperforming in Italy... Advice needed!
hi all, first post! I've just renovated a house in sout...
By robinlawrie , 7 days ago
