Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Apr 15, 2026
I’m gonna try for sure. so what should I be looking out for now?
I know I should wait at least wait 24 hours and then some, but early report is very positive even running super low flow temps, in fact the temp kept ...
So I may as well set it to 20c, no? then use the heat curve as needed. Right now the house overall is all at a good temp, so I've set:-- heating...
@jamespa - Target temperature so this isn't actually the temperature I want in the room, but it is just used to set the heat curve slope, is that righ...
Whoops I meant suspended floor, which has celetox it was either 100 or 150mm between beams, and then floorboard, then 20mm wunda insulation boards whi...
So I did turn up a couple of radiators balacing valves as I felt they were cooler to try and get them all to the same, plus no idea why put I also mov...
Sorry was out over the weekend, so lets start with the first part about the property and heating in a. bit more detail. It's an old house however was...
This is when its not defrosting i don't know why its blurry the original is clear. current 33.6 and target 49 3.5kw, 81.8% modulation air inlet t...
Finally caught it on the drop, although its mighty cold out there, it says de-icing mode active, adding this afternoon/evening run thus far.
My curve figures seem way different to that but I've changed it to 0.8 as you said, may as well try everything. Here some stats from the controller d...
Just to add, I've fired an eMail off to HG my install supplier as I feel there is enough info to get them to start scratching there heads.
That is ok, helps me look at more things. So probed AI and it claims this entity should exist, but i've looked carefully and it is not there. Manual...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
I would go for a bit of harmless fun in an attempt to l...
By JamesPa , 29 minutes ago
-
RE: Replacing Storage Heaters with a Heat Pump in a Stone Cottage
How many rooms does it have and does it have pipework f...
By JamesPa , 33 minutes ago
-
RE: battery storage without solar
Ok I used the wrong/confusing term. I meant upstream o...
By JamesPa , 1 hour ago
-
RE: Analysis of the economics of switching to an A2W ASHP compared to other heat sources
I had a meeting today with a company based out of Swede...
By Mars , 12 hours ago
-
RE: Review your electricity provider
We were with Octopus in our old house and it was fault...
By ian33a , 14 hours ago
-
RE: Estimating true heat loss from twelve months of consumption data
I did, indeed, go with the 12 KW Vaillant unit.  ...
By ian33a , 21 hours ago
-
RE: Say hello and introduce yourself
@olivierm welcome to the forums and finding the right i...
By Mars , 23 hours ago
-
RE: Tesla Powerwall (2) Calibration Cycles
I’ve had two calibration cycles in the last three month...
By Davesoa , 2 days ago
-
RE: Is This Initial Free Quote From Octopus Trusted Partner Reasonable?
@editor That's a pity, but thank you for checking. I'l...
By ltron2 , 2 days ago
-
My fifth heat pump book, Heat Pumps Explained, is out n...
By Mars , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
Just furkled Into the parameter menu. Found the master ...
By AgentGeorge , 3 days ago
-
RE: Is it just me, or does tradesperson timekeeping and communication drive you absolutely mad?
Yes, and I would suggest likely to get worse with more ...
By Batpred , 5 days ago
-
RE: Electricity price predictions
This topic seems more suitable for this thread... I a...
By Batpred , 5 days ago
-
RE: Why are ASHP installs so expensive?
It is clearly difficult to say, there must be cases whe...
By Batpred , 5 days ago
SPONSORS
