Last seen: Nov 14, 2025
I don't think you can say 'This is not how a heat pump is supposed to run'. SOFAIK there is nothing wrong with operating a fixed flow rate (and thus ...
abut 1.5 bar, but I dont think it matters much unless you have a very tall house (it merely needs to be sufficient to ensure that negative pressure do...
Those cops sounds pretty close to what I see (7kW house, 7kW Arotherm). My energy delivered is currently tracking fairly close to what my measured ga...
And, as an added bonus, the bed sheets won't need to be changed quite so frequently!
Like any heating system the consumption will depend on outside temperature. At the design minimum temperature you need to deliver roughly twice as mu...
An arrangement which recognises that this is a modern totally unnecessary extravagance? Or as @iaack suggests, waste water heat recovery Or just s...
Pretty much I'm coming to that conclusion, TBH it was my hunch when I started this thread but I wanted (and still want) to see if anyone comes up with...
No idea because not sure what they refer to. What's the context and what are the units and factory defaults? Mostly I would say leave things at...
Some manufacturers publish this data including (but not limited to) Midea, Mitsubishi, Vaillant. Its not always easy to find, Mideas is in a password...
We don't and they may well be overstated. Certainly there is a reduction in efficiency because the heat pump has to run at a higher ft, but this migh...
- 26 Forums
- 2,283 Topics
- 51.1 K Posts
- 345 Online
- 5,944 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Renewables & Heat Pumps in the News
Just a couple more thoughts to throw into the mix. &...
By JamesPa , 5 minutes ago
-
RE: Who's your electricity provider and what's your tariff?
@toodles The same experience I had with E.ON Next. My...
By TechnoGeek , 10 minutes ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
@mars I'm surprised that anything related to MCS cause...
By JamesPa , 19 minutes ago
-
RE: Maximising Home Automation: Integrating Octopus Energy & More
Thank you and I agree most people can stay clear of net...
By Batpred , 24 minutes ago
-
RE: The Hidden Secret to a Successful Heat Pump: Pipe Size Matters
@jamespa Yes that post.
By dgclimatecontrol , 32 minutes ago
-
RE: New Fogstar 15.5kWh upright solution
Please identify (some of) the batteries you're referrin...
By Transparent , 39 minutes ago
-
RE: Faulty Clivet heat pump out of the box
@steveimpey glad you got it sorted and agreed- being ig...
By benson , 2 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
50l LLH install would have introduced a shedload more a...
By JamesPa , 4 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@agentgeorge it has got 2, the other bleed screw is the...
By AdamK , 14 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
Hi Only joined the forum today and have found this t...
By Pwils , 16 hours ago
-
I too felt the podcast was useful but think it could do...
By AndrewJ , 18 hours ago
-
@adamk apologies but did not understand what exactly yo...
By Eliuccio , 18 hours ago
-
Putting a 30 cm. radio controlled wall clock on Freegle...
By Toodles , 18 hours ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@nickhorne Unfortunately not. We take the "normal" IOG ...
By HCas , 2 days ago
-
RE: Mixture of copper and plastic CH pipework. Will it be ok, or need changing?
In principle yes. Some heat pumps (I think including D...
By JamesPa , 2 days ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Some of the circuits in my home are not protected by RC...
By Batpred , 2 days ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Aqara sells some inexpensive hubs (usb dongle size) tha...
By Batpred , 2 days ago
-
RE: Extend the colder range of the weather compensation curve?
@thebinman In answer to this and personal...
By TechnoGeek , 2 days ago

