Last seen: Jun 29, 2025
I have three CT monitors on my solar output via the microinvertor controller, the Battery Management System (using a mid-approved meter) and my EV ch...
Similar systems are readily available online in the UK at the 'usual' places. They are (allegedly) G98 approved and are grid-tied, so don't generate m...
Thanks. That explains the strangely-shaped 'feet' (looking at the finned emitter on page 6). We used to have a Smiths Eco-Powerad in our kitchen be...
@downfield Are the fan assemblies incorporated into the main casing or are they a visible 'bolt-on' assembly at the bottom? This isn't clear from th...
@jamespa Thanks. Yes; I'd seen it. To be honest, it's an option I had not considered as I was under the impression that fitting of a pump to the inco...
I agree. I have my own doubts about the veracity of the data @transparent provided for my local substation. I wonder where we'd be without the level...
6kWp installation (installed last year, so no historical comparisons): November 2024 - 160kWh December 2024 - 95.7kWh January 2025 - 17...
@jamespa I'm not suggesting retaining an existing cyclinder. Replacing with a new cylinder, but venting is preferable to adding a PHE and extra pump,...
@old_scientist I am similarly frustrated. I am in a different situation in that my property is furthest from my local substation so my inverters will ...
@morgan Why not? There’s hydraulic separation between the ASHP flow and the domestic hot water.
@somerpark Mains water pressure isn’t necessarily high pressure. Minimum service level is around 1 bar. It may not be the case that there is a large p...
Surely you could keep a vented DHW cylinder and existing cold water tanks. Also, why can't the ASHP primaries have a header tank like my gas central ...
Latest Posts
-
RE: Weather compensated secondary circuits with Biomass
@sune thanks for the LK link, looks like a possible opt...
By AndyCoo , 10 hours ago
-
RE: Heat pump solutions and/or installer recommendations for France
No idea, but Google-Fu leads me to Bon chan...
By Scalextrix , 12 hours ago
-
If you are thinking of heating on the immersion conside...
By JamesPa , 23 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 1 day ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 1 day ago
-
RE: Mitsubishi cycling while on chilled water output
I absolutely wouldn't remove the buffer altogether, I'd...
By JamesPa , 2 days ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 2 days ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 3 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 4 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 4 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 5 days ago
-
@hughf, I think we’ll organise an RHH session at Instal...
By Mars , 5 days ago
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 5 days ago
