Last seen: Apr 21, 2025
I have three CT monitors on my solar output via the microinvertor controller, the Battery Management System (using a mid-approved meter) and my EV ch...
Similar systems are readily available online in the UK at the 'usual' places. They are (allegedly) G98 approved and are grid-tied, so don't generate m...
Thanks. That explains the strangely-shaped 'feet' (looking at the finned emitter on page 6). We used to have a Smiths Eco-Powerad in our kitchen be...
@downfield Are the fan assemblies incorporated into the main casing or are they a visible 'bolt-on' assembly at the bottom? This isn't clear from th...
@jamespa Thanks. Yes; I'd seen it. To be honest, it's an option I had not considered as I was under the impression that fitting of a pump to the inco...
I agree. I have my own doubts about the veracity of the data @transparent provided for my local substation. I wonder where we'd be without the level...
6kWp installation (installed last year, so no historical comparisons): November 2024 - 160kWh December 2024 - 95.7kWh January 2025 - 17...
@jamespa I'm not suggesting retaining an existing cyclinder. Replacing with a new cylinder, but venting is preferable to adding a PHE and extra pump,...
@old_scientist I am similarly frustrated. I am in a different situation in that my property is furthest from my local substation so my inverters will ...
@morgan Why not? There’s hydraulic separation between the ASHP flow and the domestic hot water.
@somerpark Mains water pressure isn’t necessarily high pressure. Minimum service level is around 1 bar. It may not be the case that there is a large p...
Surely you could keep a vented DHW cylinder and existing cold water tanks. Also, why can't the ASHP primaries have a header tank like my gas central ...
- 22 Forums
- 2,086 Topics
- 46 K Posts
- 19 Online
- 3,377 Members
Join Us!
Trusted Installers
Struggling to find a reliable heat pump installer? A poor installation can lead to inefficiencies and high running costs. We now connect homeowners with top-rated installers who deliver quality work and excellent service.
✅ Verified, trusted & experienced installers
✅ Nationwide coverage expanding
✅ Special offers available
Latest Posts
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness HI, The rules is a best practise, the ...
By ASHP-BOBBA , 7 hours ago
-
RE: Vaillant AroTherm Plus 7kW
@scalextrix if your under unit heater is like our Myson...
By Judith , 9 hours ago
-
RE: Getting the best out of a heat pump - is Homely a possible answer?
@cathoderay how did you get a script to run for that- d...
By benson , 10 hours ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
@ashp-bobba thank you, and equally so, thank you for ta...
By Mars , 2 days ago
-
@judith good to know… I’ll continue to feed Wattson, an...
By Mars , 2 days ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
@editor great article re accreditation. I note ISO/IEC ...
By Bart , 3 days ago
-
RE: Renewables & Heat Pumps in the News
Here’s a little more technical detail/p>
By Judith , 3 days ago
-
RE: Who's your electricity provider and what's your tariff?
I don't (yet), but my PW3 is due to be installed shortl...
By Old_Scientist , 4 days ago
-
RE: MCS and NAPIT complaints process
@chrislay, is your heat pump complaint still unresolved...
By Mars , 4 days ago
-
RE: ASHP Install from hell - help please
@saf1973 I’ve been going through old cases on the forum...
By Mars , 4 days ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@aaron There's the rub, the database does not list my ...
By AF1 , 4 days ago
-
RE: Commencing on an ASHP Installation Process
Yes, it's "doable" if everything goes to plan, they arr...
By Old_Scientist , 6 days ago
-
RE: How not to install a heat pump
You are right. Thinking on this has evolved over the p...
By JamesPa , 6 days ago
-
RE: DHW SET UP with Samsung gen 5
Thats good news indeed, you are very likely almost ther...
By JamesPa , 6 days ago
-
RE: Plate heat exchanger considerations
As far as I can tell my vented system would have a peak...
By Scalextrix , 6 days ago
-
RE: Air Changes per Hour - ACH and the MCS requirement
There have been a few discussions dotted around (e.g. I...
By Declan90 , 7 days ago