Last seen: Sep 19, 2024
The mixing valve arrangement, and the water pump above it, is as you say primarily for systems where the supplied water is above the temperature limi...
@jamespa The UFH mixing valves are shown in the final 2 photo's in the original post.
@ngillam Check the thermistor readings as detailed in the attached video. If the controller is indicating -39C then check to see if the control...
@iantelescope Thank you for providing the graph for sensor 1. Could you now please supply the graphs for sensor 3 and sensor 7 as requested. Ple...
@iantelescope How many radiators are on your system and are they all being heated?
Thank for supplying the model number for the energy meter. Could you please explain why you included the additional information that was not requeste...
@iantelescope Could you please confirm the model of Sharky that you have installed. I'm afraid that I am becoming confused by the multitude of gra...
@iantelescope Is the secondary water pump starting and stopping?
@iantelescope As an Instrumentation and Control System Engineer, the starting point is always to ensure that all sensors are correctly installed, th...
@toodles During a 24 hour period our baseload is in the 100W to 300W range with occasional dips below and surges above. Assuming a 200W / hr average...
@iantelescope Please explain what you mean by 'errors galore'. Please explain how you are monitoring and recording the various signals from the se...
@iantelescope Thank you for the Sharky readings, but could you please include the units and any decimal points. Please don't go off at a tangent o...
Latest Posts
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness, I think your best bet would be using ...
By Aventus Eco , 3 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@toodles all depends on asking the right questions! And...
By Tim441 , 5 hours ago
-
RE: Mitsubishi cycling while on chilled water output
I absolutely wouldn't remove the buffer altogether, I'd...
By JamesPa , 12 hours ago
-
RE: Commencing on an ASHP Installation Process
I received confirmation this morning that my Greener Ho...
By Sheriff Fatman , 14 hours ago
-
@jamespa Thanks for the advice - very helpful. I had al...
By abam48 , 2 days ago
-
RE: Weather compensated secondary circuits with Biomass
Hi @andycoo we do an LK 110 standalone weather compensa...
By Sune , 2 days ago
-
RE: Adding battery storage to SolarEdge PV system
@chandykris No need to apologise at all! I forgot to ad...
By Toodles , 2 days ago
-
RE: Say hello and introduce yourself
Yes please do Suggesting a loss in the region...
By JamesPa , 2 days ago
-
As I have reported elsewhere we turned on the cooling o...
By downfield , 3 days ago
-
-
@el3b Hi, sorry to hear that, it is advisable to instal...
By ASHP-BOBBA , 4 days ago
-
RE: Difficult positioning of air source heat pump
@rikiarn Out of intrigue, the thread reads as though Ai...
By Sheriff Fatman , 4 days ago
-
RE: Mitsubishi Ecodan Fails to Heat Water despite temperature drop
@m1kegibson If you are able to access the service me...
By HarriUp , 5 days ago
