Last seen: Sep 19, 2024
You will probably need to change the speed of the water pump external to your heat pump to change the flow rate.
Hi Kev, It would appear that you can deactivate the 'freeze stat' function as shown below. Freeze stat functionMenu subtitle Function/ Description...
@cathoderay Thanks for that. In SCADA systems there are normally two ways that data is passed from computer to computer, one is by timed polling o...
Assuming that the original heat loss calculations were reasonably accurate, at an outside temperature of 2C, you should expect a heat loss of approxim...
Sorry, it is per hour, but only when it is -2.2C outside. At -5C it will be more. 😋
What made me question your installation, is the water pump is normally located on the return pipe, but it will still work on the flow pipe.
If the pipes going through the wall on the left-hand side of the photo are going to the heat pump, I would suggest that you check which is the flow an...
@cathoderay To answer your first question. but if it puts it the 'next time slot in the Cloud record' then why doesn't the bar displayed in the 18...
I assume that you are changing the water pump speed on the FTC controller, but if the actual water pump is not wired the controller, then changing the...
I would have expected that the above should have been set by your installer, for example, if you have a 3kW immersion heater installed then the releva...
Looking at the photo I suspect that the upper sensor is not making good thermal contact, particularly at the end section where the sensor is often loc...
Latest Posts
-
RE: Midea ASHP – how to set weather compensation
@pash44pump Referring to the problem of rooms with diff...
By Tasos , 20 minutes ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 1 hour ago
-
RE: Big Changes Coming to Our Heat Pump System
@old_scientist, our system was royally bodged six years...
By Mars , 1 hour ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
@scalextrix You're assuming that the source of the comm...
By Transparent , 1 hour ago
-
@jamespa thanks, I appreciate the offer. For n...
By DREI , 15 hours ago
-
RE: Who’s Caved and Switched the Heating On Already?
I have 3 women in the house, 2 little ones, so my heati...
By DREI , 20 hours ago
-
@damon thanks. I will do as you suggest. Hopefully I wi...
By bontwoody , 21 hours ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 2 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 2 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 3 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
I realise im overdue an update on my situation. first...
By Cleardene-ashp , 3 days ago
-
RE: Replacing Worcester oil boiler with an ASHP
@toodles thanks. I was told by the engineer that this h...
By JulianC , 3 days ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
A week later, I'm finally picking up this comment... ...
By Transparent , 3 days ago
-
RE: COP is not the only measure of efficiency
We keep all our TRVs fully open using the whole house a...
By Old_Scientist , 3 days ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
I am pleased to say at 4pm today we have added another ...
By ASHP-BOBBA , 4 days ago
-
RE: Renewables & Heat Pumps in the News
To unpack this a little.... 1) how many of us in this...
By Lucia , 4 days ago
-
RE: Vaillant aroTherm Plus 10kW thoughts?
@realevil the fans and fan speed / coil size (height, w...
By ASHP-BOBBA , 5 days ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@morgan this can just be done by your sepecilist when t...
By ASHP-BOBBA , 5 days ago
-
RE: Anyone still weathering it out with Agile?
@toodles I guess it all comes down to import averages. ...
By Tim441 , 5 days ago
