Last seen: Sep 19, 2024
Things do stay the same. My wife still hates the cold. 🙄
I would suggest that you check where each pump is connected and feeding. I suspect that the right-hand one may be for your DHW, since it appears to be...
Does it have a nameplate?
@sarah It would appear that you have 3 water pumps and what could possibly be a plate heat exchanger. I would need to be able to read the model num...
There will be an air release valve somewhere, but I'm not certain where it will be located, normally in the highest section. I suggest that you Google...
@sarah I would expect the flow rate to be greater than 13 litres per minute at a pump speed of 5, is your water pump actually wired to the heat pump...
@cathoderay Thanks for the response, which appears to close one avenue of investigation. I have attached a spreadsheet detailing the data that I thi...
@cathoderay I forgot to add the code in the previous post. from homeassistant.const import ( CONF_NAME, CONF_TOKEN, CONF_HOST, ...
@sarah I would suggest that you watch the following video, which details how to check and change the pump speed. Before making any changes I would a...
Looking at the temperature gauges in the photo's, it would appear that the water is going into the UFH at approximately 28C, and coming out at approxi...
In the _init_.py there is the following code which imports data from HA. I have a feeling that HA contains a list of the sensors etc. from which data ...
@cathoderay I carry out day trading on the stock market, so often have lots of free time when nothing exciting is happening, so you don't have to co...
Latest Posts
-
RE: Testing new controls/monitoring for Midea Clone ASHP
Interesting. The minute data previously showed very di...
By JamesPa , 3 minutes ago
-
RE: Midea ASHP – how to set weather compensation
@pash44pump - I think the COP of 4.01 comes from the 's...
By cathodeRay , 11 minutes ago
-
RE: Electricity price predictions
Those of you on Agile will do well tomorrow; there are ...
By Toodles , 27 minutes ago
-
Ya can’t win! It is S*d’s Law!
I have been receiving invitations from Octopus Energy t...
By Toodles , 1 hour ago
-
RE: Who’s Caved and Switched the Heating On Already?
We've been running our Ecodan system, installed in June...
By Sheriff Fatman , 3 hours ago
-
RE: Big Changes Coming to Our Heat Pump System
@jamespa The dormitories at my boarding school (in Exet...
By Toodles , 6 hours ago
-
Ok. Two schools of thought. The first is to run the ...
By JamesPa , 22 hours ago
-
@drei Willing as I am to help, I don't think I'm yet ...
By JamesPa , 23 hours ago
-
RE: Is Your Broadband Router the Weak Link in Your High-Tech Home?
I hear you on the locality issue @transparent, and I ag...
By Scalextrix , 1 day ago
-
Selling 5 year old ASHP & Gas Combi Boiler - £590
Selling a 5-year-old Daikin Altherma Hybrid Air Source ...
By Paul G , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
Er true, it should have read l/hr!
By JamesPa , 1 day ago
-
@damon thanks. I will do as you suggest. Hopefully I wi...
By bontwoody , 2 days ago
-
RE: Is a Valliant Inline 6kW heater a BUS buster?
Much of that is true in principle, but its not likely t...
By JamesPa , 3 days ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@dgclimatecontrol I attach the responses from 2 potenti...
By pash44pump , 3 days ago
-
RE: Buffers, hot water and cooling
@dgclimatecontrol thanks, that's helpful.
By JamesPa , 4 days ago
-
RE: Failing heat pump system - seeking thoughts on a rebuild
I realise im overdue an update on my situation. first...
By Cleardene-ashp , 4 days ago
-
RE: Replacing Worcester oil boiler with an ASHP
@toodles thanks. I was told by the engineer that this h...
By JulianC , 4 days ago
-
RE: What crazy nonsense are inverter limits and why are they imposed?
A week later, I'm finally picking up this comment... ...
By Transparent , 4 days ago
-
RE: COP is not the only measure of efficiency
We keep all our TRVs fully open using the whole house a...
By Old_Scientist , 4 days ago
